Abstract:The gas-solid flows in a two-dimensional downer of 10 m in height and 0.10 m in width were simulated using a CFD-DEM method, where the motion of particles was modeled by discrete element method (DEM) and the gas flow was described by Navier-Stokes equations. The simulations revealed a rich variety of developing flow structures in the downer under different operating conditions. The two-phase flow development can be clearly characterized by the micro-scale particle distributions in the downer. Near the inlet, the particle distribution is dominated by the distributor design. Then, the particles disperse in the column, forming a homogeneous transit region. After that clusters start to form and modulate the gas-solid flow field till the fully-developed state. The particle-scale simulation disclosed that the clusters are composed of loosely collected particles, and these particles have the same flow direction as the bulk flow so that no particle backmixing can be observed. As the particles in the downer have the tendency to maintain the inertia, the capability of lateral transfer of particles is relatively weak, which was illustrated by tracking the movement of the single particles and clusters. The simulations of the inlet effect on the hydrodynamics in the downer showed that the gas-solid flow structure and the mixing behavior are sensitive to the inlet design. An inappropriate design or operation would probably cause the undesired flow phenomena such as the wide distribution of residence times. The time-averaged hydrodynamics based on the transient simulations showed good agreement with the experimental findings in the literature. The simulation based on the CFD-DEM coupled approach provides a theoretical way to comprehensively understand the physics at micro- to macro-scales in the co-currently downward gas-solid flows. (c) 2009 Elsevier B.V. All rights reserved.

Numerical Simulation of Inherent Boric Mixing Phenomenon Inside Reactor Annular Down-Comer

Hydrodynamics in a Novel Gas-Liquid Cocurrent Bubble Reactor and its CFD Simulation

Micro-Mixing Enhancement in a Taylor-Couette Reactor Using the Inner Rotors with Various Surface Configurations

Bubble Size “bimodal” Distribution Enhances Mixing and Mass Transfer in Slurry Bubbling Column Reactor

Experimental Investigation on Distribution of Boric Acid in a Vertical 1 × 2 Rod Array Channel

CFD-DEM Simulation of Flow and Mixing Behavior in Downers with Different Entrance Structures

Simulation and Experimental Verification of Boron Diffusion and Mixing in T-Tube Flow

Effect of Hydrodynamic Heterogeneity on Micromixing Intensification in a Taylor–Couette Flow Reactor with Variable Configurations of Inner Cylinder

Numerical Simulation of Hydrodynamics in Downers Using a CFD–DEM Coupled Approach

Numerical simulation of a fully baffled biological reactor: The differential circumferential averaging mixing plane approach

Mixing in the Confined Vortical Flow in Non-Aligned T-jets Reactors

Numerical investigation on mixing performance in rod bundle with spacer grid based on anisotropic turbulent mixing model

CFD Analysis of Laminar Mixing Mechanism and Performance in an Oscillatory Baffled Reactor

Numerical Investigation of the Effect of Mixing Vanes on Subcooled Boiling in a 3 × 3 Rod Bundle Channel with Spacer Grid

Numerical Analysis of Fluid Mixing Characteristics in Cold Leg and Downcomer under High Pressure Safety Injection

Numerical Analysis on Subcooled Boiling in PWR Coolant Channel Based on a Modified Multi-Scale Interface Model

Numerical Simulation of Liquid Mixing Inside Soft Droplets with Periodic Deformation by a Lattice Boltzmann Method

Numerical Simulation in A Subcooled Water Flow Boiling for One-Sided High Heat Flux in Reactor Divertor

CFD Study on the Concentration Patterns in an Orifice-Baffled Oscillatory Flow Reactor

Numerical Simulation of Mixing Process in a Splitting-and-Recombination Microreactor

Plif Experiment and Verification of Boron Mixed Diffusion Model Driven by Turbulence in Nuclear Reactor