Abstract:Thermohydraulic analysis of postulated accidents will identify system responses to accident scenarios and aid in developing design of safety systems and strategies to prevent or mitigate accident propagation. This paper reports analyses of four accident scenarios of a fusion DEMO reactor based on water-cooled ceramic-pebble breeder blanket. The accidents analyzed, which were selected based on the previous logical accident analysis, are ex-vessel loss of coolant of the primary cooling system, in-vessel loss of coolant of the first wall (FW) cooling pipes, loss of coolant in blanket modules, and loss of vacuum. The analyses have identified thermohydraulic responses of the DEMO systems to these accidents, pressure loads to confinement barriers for radioactive materials. Effectiveness of the safety systems and the integrity of the primary and final (secondary) confinement barriers against the accidents are discussed. As for the final confinement barrier, we show for the first time that implementation of a pressure suppression system (PSS) to the cooling system vault and a vacuum breaker to the tokamak pit is effective in significantly keeping the integrity of the final confinement barrier against the ex-vessel loss-of-coolant and loss-of-vacuum accidents, respectively. As for the primary confinement barrier, we show for the first time that limitation of the number of blankets from which a helium purge gas line collects the bred tritium will be a key technical issue to prevent propagation of loss of coolant in a blanket box through the purge gas line and then suppress the pressurization of the vacuum vessel (VV). For the in-vessel loss of coolant of the FW cooling pipes, further optimization of the PSS or design solutions regarding in-vessel components and plasma control will be necessary to decrease the pressure load to the VV and ensure the integrity of the primary confinement barrier.

Parametric Analysis of Influence Factors to the In-Vacuum Vessel Loca for Cfetr Based on Relap5

CFD Modelling of Loss of Vacuum Accident (LOVA) for CFETR

Thermal–Hydraulic Analysis for One Water-Cooled Blanket Module of CFETR Based on RELAP5

Numerical Simulation of Airflow Characteristics During the Loss of Vacuum Accident of CFETR

Thermal Hydraulic Characteristics During Ingress of Coolant and Loss of Vacuum Events in Fusion Reactors

Investigation into the In-box LOCA of Water Cooled Solid Breeder Blanket for CFETR Based on PWR Conditions

Analyses for Passive Safety of Fusion-Reactor During Ex-Vessel Loss-Of-Coolant Accident

Thermal-hydraulic Analysis on the Whole Module of Water Cooled Ceramic Breeder Blanket for CFETR

Numerical Simulation of Airflow and Dust Migration in Vacuum Vessel During Loss of Vacuum Accident for Updated CFETR

Thermohydraulic Analysis of Accident Scenarios of a Fusion DEMO Reactor Based on Water-Cooled Ceramic Breeder Blanket: Analysis of LOCAs and LOVA

Experimental and Numerical Studies on Heat Transfer and Fluid Flow Characteristics in A Vacuum Vessel of Fusion Reactor after the Loss-Of-Vacuum-Events Occurred

Numerical Analysis of Loss of Vacuum Accident (LOVA) and Preliminary Discussion about Dust Resuspension for CFETR

Preliminary Analysis of In-Vessel First Wall Cooling Pipe Ruptures for ITER

Implementation of CO2 and PbLi As Working Fluids in RELAP5/MOD3.3 Towards Accident Analysis of COOL Blanket for CFETR

Thermo-mechanical Analysis on the Full Module of Water Cooled Ceramic Breeder Blanket for CFETR

Preliminary Thermo-hydraulic and Mechanical Analysis for CFETR Divertor

Progress on Neutronic Analysis for CFETR

Analysis of nuclear response in CFETR toroidal field coils with density reduction VR technique

Geometric Optimization and Reliability Assessment of Reactor Vessel Insulation for IVR-ERVC Based on Passive System Functional Reliability Concept

The Flow Instability Phenomenon in the Loss of Coolant Accident of the Water Cooled Blanket

Steady States and LOFA Analyses of the Updated WCCB Blanket for Multiple Fusion Power Modes of CFETR