Abstract:In the last decade flow reactors for material synthesis were firmly established, demonstrating advantageous operating conditions, reproducible and scalable production via continuous operation, as well as high-throughput screening of synthetic conditions. Reactor fouling, however, often restricts flow chemistry and the common fouling prevention via segmented flow comes at the cost of inflexibility. Often, the difficulty of feeding reagents into liquid segments (droplets or slugs) constrains flow syntheses using segmented flow to simple synthetic protocols with a single reagent addition step prior or during segmentation. Hence, the translation of fouling prone syntheses requiring multiple reagent addition steps into flow remains challenging. This work presents a modular flow reactor platform overcoming this bottleneck by fully exploiting the potential of three-phase (gas-liquid-liquid) segmented flow to supply reagents after segmentation, hence facilitating fouling free multi-step flow syntheses. The reactor design and materials selection address the operation challenges inherent to gas-liquid-liquid flow and reagent addition into segments allowing for a wide range of flow rates, flow ratios, temperatures, and use of continuous phases (no perfluorinated solvents needed). This "Lego®-like" reactor platform comprises elements for three-phase segmentation and sequential reagent addition into fluid segments, as well as temperature-controlled residence time modules that offer the flexibility required to translate even complex nanomaterial synthesis protocols to flow. To demonstrate the platform's versatility, we chose a fouling prone multi-step synthesis, i.e., a water-based partial oxidation synthesis of iron oxide nanoparticles. This synthesis required I) the precipitation of ferrous hydroxides, II) the addition of an oxidation agent, III) a temperature treatment to initiate magnetite/maghemite formation, and IV) the addition of citric acid to increase the colloidal stability. The platform facilitated the synthesis of colloidally stable magnetic nanoparticles reproducibly at well-controlled synthetic conditions and prevented fouling using heptane as continuous phase. The biocompatible particles showed excellent heating abilities in alternating magnetic fields (ILP values >3 nH m2 kgFe-1), hence, their potential for magnetic hyperthermia cancer treatment. The platform allowed for long term operation, as well as screening of synthetic conditions to tune particle properties. This was demonstrated via the addition of tetraethylenepentamine, confirming its potential to control particle morphology. Such a versatile reactor platform makes it possible to translate even complex syntheses into flow, opening up new opportunities for material synthesis.

Direct Continuous Synthesis of Oleic Acid-Modified Fe3O4 Nanoparticles in a Microflow System

Flexible and Effective Preparation of Magnetic Nanoclusters via One-Step Flow Synthesis

Accelerated and Simplified Synthesis of Magnetic Mesoporous Nanoparticles in a Continuous Multistep Microfluidic System

A facile strategy to synthesize monodisperse superparamagnetic OA-modified Fe 3 O 4 nanoparticles with PEG assistant

Surface-modification of SiO2 Nanoparticles with Oleic Acid

“One pot”synthesis of oleic acid-coated Fe3 O4 and the effect of oleic acid dosage

A versatile non-fouling multi-step flow reactor platform: demonstration for partial oxidation synthesis of iron oxide nanoparticles

Oleic Acid Surface Modification in the Preparation of Magnetic Nanoparticles by a Chemically Induced Transition

An efficient and green pathway for continuous Friedel-Crafts acylation over α-Fe2O3 and CaCO3 nanoparticles prepared in the microreactors

Continuous Flow Microreactors for the High-efficiency Enzymatic Synthesis of 10-Hydroxystearic Acid from Oleic Acid

Non-Monotonic Size Change of Monodisperse Fe3o4 Nanoparticles in the Scale-Up Synthesis

Large-Scale, Facile Transfer of Oleic Acid-Stabilized Iron Oxide Nanoparticles to the Aqueous Phase for Biological Applications

Synthesis of Feco Nanoparticles from Feo(Oh) and Co3o4 Using Oleic Acid As Reduction Agent

Multistep cascade continuous flow synthesis of AOS based on microreactor

A Simple Method to Synthesize Modified Fe3o4 for the Removal of Organic Pollutants on Water Surface

Facile Method to Synthesize Oleic Acid-Capped Magnetite Nanoparticles

Synthesis of Fe3O4 Nanoparticles and Preparation of Magnetic Fluids

Two-step single-reactor synthesis of oleic acid- or undecylenic acid-stabilized magnetic nanoparticles by thermal decomposition

Flow synthesis and multidimensional parameter screening enables exploration and optimization of copper oxide nanoparticle synthesis

Controlled Synthesis and Chemical Conversions of FeO Nanoparticles

The Yin And Yang Of Coordinating Co-Solvents In The Size-Tuning Of Fe3o4 Nanocrystals Through Flow Synthesis