Abstract:Deformation processing of immiscible systems is observed to disrupt thermodynamic equilibrium, often resulting in nonequilibrium microstructures. The microstructural changes including nanostructuring, hierarchical distribution of phases, localized solute supersaturation, and oxygen ingress result from high-strain extended deformation, causing a significant change in mechanical properties. Because of the dynamic evolution of the material under large strain shear load, a detailed understanding of the transformation pathway has not been established. Additionally, the influence of these microstructural changes on mechanical properties is also not well characterized. Here, an immiscible Cu-4 at. % Nb alloy is subjected to a high-strain shear deformation (∼200); the deformation-induced changes in the morphology, crystal structure, and composition of Cu and Nb phases as a function of total strain are characterized using transmission electron microscopy and atom probe tomography. Furthermore, a multimodal experiment-guided computational approach is used to depict the initiation of deformation by an increase in misorientation boundaries by crystal plasticity-based grain misorientation modeling (strain ∼0.6). Then, co-deformation and nanolamination of Cu and Nb are envisaged by a finite element method-based computational fluid dynamic model with strain ranging from 10 to 200. Finally, the experimentally observed amorphization of the severely sheared supersaturated Cu-Nb-O phase was validated using the first principle-based simulation using density functional theory while highlighting the influence of oxygen ingress during deformation. Furthermore, the nanocrystalline microstructure shows a >2-fold increase in hardness and compressive yield strength of the alloy, elucidating the potential of deformation processing to obtain high-strength low-alloyed metals. Our approach presents a step-by-step evolution of a microstructure in an immiscible alloy undergoing severe shear deformation, which is broadly applicable to materials processing based on friction stir, extrusion, rolling, and surface shear deformation under wear and can be directly applied to understanding material behavior during these processes.

Mass Transport in a Highly Immiscible Alloy on Extended Shear Deformation

Coupling Between Deformation and Mass Transport in an Immiscible Alloy at High Shear Strains

Extended Shear Deformation of the Immiscible Cu–Nb Alloy Resulting in Nanostructuring and Oxygen Ingress with Enhancement in Mechanical Properties

Microstructural evolution in Cu–Nb processed via friction consolidation

Mechanical Alloying of Immiscible Metallic Systems: Process, Microstructure, and Mechanism

Rapid Solidification of Non-Stoichiometric Intermetallic Compounds: Modeling and Experimental Verification

Dislocation assisted face-centered-cubic/body-centered-cubic interface mixing during severe plastic deformation

Rapid Solidification Structure Refinement Mechanism in Highly Undercooled Cu Based Ternary Alloys

Extreme shear-deformation-induced modification of defect structures and hierarchical microstructure in an Al–Si alloy

Synergistic grain boundary engineering for achieving strength-ductility balance in ultrafine-grained high-Cr-bearing multicomponent alloys

Decoupling of Strain and Temperature Effects on Microstructural Evolution During High Shear Strain Deformation

A Molecular Dynamics Simulation to Shed Light on the Mechanical Alloying of an Al-Zr Alloy Induced by Severe Plastic Deformation

On the compositional and structural redistribution during partial recrystallisation: a case of σ-phase precipitation in a Mo-doped NiCoCr medium-entropy alloy

Substantially enhanced homogeneous plastic flow in hierarchically nanodomained amorphous alloys

Dynamics and microstructural evolution of bulk amorphous Cu 12.5 Ni 10 Zr 41 Ti 14 Be 22.5 during phase separations: a small-angle neutron scattering approach

Shear strain gradient in Cu/Nb nanolaminates: Strain accommodation and chemical mixing

Dynamic recrystallization and precipitation behavior of a novel Sc, Zr alloyed Al-Zn-Mg-Cu alloy during hot deformation

Effect of compositional heterogeneity on the mechanical properties of a single-phase Cu-9Al alloy with different grain sizes

Interface-Driven Solid-State Alloying in an Immiscible Cu-W System

Strength-ductility synergy via cryogenic severe plastic deformation in an Al–Mg alloy achieved by clustering-induced strengthening

Atomic scale understanding of the defects process in concurrent recrystallization and precipitation of Sm-Co-Fe-Cu-Zr alloys