Abstract:A numerical model describing the ballistic behavior of a commercially used initiator is presented in this article. This model was built on the principle of conservation of mass and energy in the multi-phase framework incorporated with multi-loaded conditions. After obtaining the information about the grain size distribution in each composite, a fixing factor was proposed based on the surface area ratio of the composites. Thus, the solid propellant burning process based on distributed grain size was described, and the burn rate parameters of the applied pyrotechnic compositions were re-evaluated for different preconditioned temperature levels according to Vieille’s law. The influence of bridge wire and initiator metal cap was further modeled concerning their characteristic properties according to the observed measurements. The validation of the entire initiator model in the closed bomb test showed quantitative agreement with the measured pressure evolution, while the parameter study for evaluating the ballistic sensitivity of each component delivered some insights into the product development process. Furthermore, the configuration of a cold gas inflator was utilized to evaluate the initiator impact for a realistic application, where the shock wave intensity during deployment serves the main function in the inflator design. Incorporated with CFD simulations to capture the shock wave propagation, 0D-3D coupling strategy for initiator ballistics to inflator configuration was realized. Besides, the simulation results reflected the physical conditions in a proper manner. In particular, the parameter study led to a better understanding of interactions between inflator components, which were barely possible to be quantified through the measurements. The proposed initiator model could also be used in combination with other mechanical principles as a component of pyrotechnic devices such as pin-puller, electric line cutters, or airbag inflators. The detailed information gained in describing the physical properties enabled us to assess the existing design quantitatively and to have better control of the product quality.

Temperature and Humidity Accelerated Model and Modeling Technology of Initiating Device

Research on Data Processing Algorithms for Two-factor Accelerated Storage Test of Initiating Explosives

Method of Determining the Critical Impact Velocity of Energetic Devices

Temperature Model of Electrical Equipment and Its Application in Trend Forecast for Current-Carrying Fault

Numerical Investigation of Pyrotechnical Initiators and Their Impact in Airbag Inflator Applications: Ballistic Modeling and Functional Analysis

Design and Implementation of an Accelerating Rate Calorimeter Based on Modelica Modeling

Taguchi method-based evaluation of thermal hazard of lift-off pyrotechnics under various storage conditions

Synthetic Reliability Assessment Model Involving Temperature–Humidity Step-Stress Based on Wiener Process

Coupled Mechanical−Thermal Model for Numerical Simulations of Polymer−Bonded Explosives under Low−Velocity Impacts

Testing and evaluation of the thermal damage caused by an explosion of energetic materials

Storage life evaluation method based on segmented nonlinear Arrhenius model

Correlation Simulation Study of 71°C Method Formula and Arrhenius Formula

A Surrogate Model for the Rapid Evaluation of Electromagnetic-Thermal Effects under Humid Air Conditions

Reliability estimation for one-shot devices under cyclic accelerated life-testing

Rapid identification of the consistency of failure mechanism for constant temperature stress accelerated testing

Study on Transient Dynamics of the Pyrotechnic-Driven Large Flexible Expansion Mechanism

Modeling and calculation of thermal explosion time to ignition of cylindrical fireworks and crackers

Accelerated capacity model of lithium-ion battery based on non-linear polynomial method with stress coupling analysis under two electrical variables

Comparison Between Temperature and Pyrolysis Dependent Models to Evaluate the Lightning Strike Damage of Carbon Fiber Composite Laminates

Numerical study of countermeasure against thermal stimuli for HMX-based polymer-bonded explosives

Study on Feasibility of Storage Accelerated Testing Based on Parameter Degradation for Aerospace Relays