Abstract:The measurement of five degrees-of-freedom (5-DOF) error motions, including radial, axial, and tilt motions, is crucial for ultra-precision rotary axes, which are key components of ultra-precision machine tools and instrumentation. In this study, we propose an interference-enhanced micro-vision technique to concurrently derive the 5-DOF error motions from a single-shot two-dimensional image, which was captured by a standard industrial camera equipped with an interference objective lens. By consolidating the essential features into a single optical path, the interference-enhanced micro-vision technique ingeniously merges machine micro-vision and modified white-light interference to detect in-plane and out-of-plane motions. Numerical simulations demonstrated, the basic principle for deriving the 5-DOF error motions, and the magnification of objective lens had inconsistent effects on the measurement accuracy for the radial and tilt motions, i.e. higher magnification led to higher radial accuracy but lower tilt accuracy. As practical application, the error motion detection capability was demonstrated by simultaneously measuring the 5-DOF synchronous and asynchronous error motions for a typical air bearing spindle at rotation speeds of 8.33, 108.33, and 308.33 rpm. The synchronous errors were nearly identical at various spindle speeds. However, because of system dynamics, increased vibrations were observed to be superimposed on the basic tilt error motions as the spindle speeds increased, which were verified by the vibration marks imprinted on the turned surfaces. For the 5-DOF motion measurements, the least-square fitting using large-volume edge and greyscale data of the captured image enabled super-high resolutions, despite using a camera with a relatively large pixel size and low bit depth. These results demonstrate that the proposed interference-enhanced micro-vision technique is a simple and effective tool for measuring spatial error motions in ultra-precision rotary axes.

Improved Closed-Loop Tracking Interferometer Measurement for a Five-Axis Machine Tool with a Bi-Rotary Milling Head

A High-Precision Five-Degree-Of-Freedom Measurement System Based on Laser Collimator and Interferometry Techniques

Development of Equipment for Simultaneously Measuring Two-dimensional Rotation Angles of the Linear Guide Track

Study of the Method for Measuring Four-Degree-of-Freedom Geometric Errors of a Linear Stage

High-Accuracy Method for Measuring Two-Dimensional Angles of A Linear Guideway

Simultaneous Measuring Method Of Linear Guide Geometric Errors In Four-Degrees Of Freedom

Four Degree-Of-Freedom Geometric Error Measurement System with Common-Path Compensation for Laser Beam Drift

Implementation and Verification of a Four-Probe Motion Error Measurement System for a Large-Scale Roll Lathe Used in Hybrid Manufacturing

Sensitivity analysis of inverse multilateration based on tracking interferometer measurement for a bi-rotary head five-axis machine tool

An efficient method for measuring and identifying geometric and dynamic errors in dual five-axis machine tools

Embedded displacement measuring device based on error separating technique of multi-circle overlapping three-probe method

Interference-enhanced micro-vision-based single-shot imaging of five degrees-of-freedom error motions for ultra-precision rotary axes

A New Error Measurement Method to Identify All Six Error Parameters of A Rotational Axis of A Machine Tool

Research on the Error Measurement and Error Compensation Technology for CNC Machine Tools

A systemic approach to identify the volumetric and dynamic errors for five-axis machine tools with double ball-bar test

Identification of Kinematic Errors of Five-Axis Machine Tool Trunnion Axis from Finished Test Piece

A high-precision laser method for directly and quickly measuring 21 geometric motion errors of three linear axes of computer numerical control machine tools

A Framework for a Large-Scale Machine Tool With Long Coarse Linear Axes Under Closed-Loop Volumetric Error Compensation

The Tool Following Function-Based Identification Approach for All Geometric Errors of Rotary Axes Using Ballbar

Accuracy enhancement of five-axis machine tool based on differential motion matrix: Geometric error modeling, identification and compensation

Accuracy Measurement and Error Compensation of Three-Axis CNC Milling Machine