Abstract:This article proposed a new 3-D parallel winding method (also named planar-Litz), which just requires minimal interleaving between primary and secondary windings. Low ac resistance and low parasitic capacitance can both be achieved. A general 1-D analytical model is developed to predict parallel winding circulating/eddy current in planar transformers. The analytical model shows that there is high circulating current in direct-parallel windings in high-frequency planar transformers. Direct-parallel windings and planar-Litz windings have been compared both in finite-element analysis (FEA) and experimental prototypes, which proves that the $d\Phi / dt$ -induced voltage cancellation in planar-Litz winding can minimize circulating current. A 3.0-kW and a 3.2-kW 500-kHz $LLC$ resonant converter are built to compare the direct-parallel winding and planar-Litz winding structures. More than 98.5% peak efficiencies are achieved in both converters. The comparisons of thermal images and efficiencies further verify the effectiveness of planar-Litz winding. The 98.6% peak efficiency and the 97.8% full-load efficiency are measured. The planar-Litz windings planar transformer demonstrated a 26% winding loss reduction and 0.25% converter efficiency improvement over the direct-parallel winding planar transformer on 3 kW. The hot spot inside the transformer can be relieved and hence allow more power delivery.

A Multi-conductor Distributed Capacitance Equivalent Model of Planar Transformer for GaN-based LLC Converter

A Symmetrical Resonant Converter and PCB Transformer Structure for Common Mode Noise Reduction

High-Frequency High-Efficiency LLC Module with Planar Matrix Transformer for CRPS Application Using GaN Power IC

A WBG based three phase 12.5 kW 500 kHz CLLC resonant converter with integrated PCB winding transformer

An Optimization Method for Planar Transformer Winding Losses in GaN Based Multi-output Flyback Converter

Modelling and Optimisation of Planar Matrix Transformer for High Frequency Regulated LLC Converter

Impact of Dielectric Material on Passive Integration in LLC Resonant Converter

Optimization Design of Planar Transformer in GaN-based LLC Resonant Converter

Design and Implementation of a Planar Transformer With Fractional Turns for High Power Density LLC Resonant Converters

An LLC Converter Based on SiC MOSFETs and Minimized-leakage-inductance Planar Transformer

Virtual Prototype and GaN HEMT Based High Frequency LLC Converter Design

GaN-Based LLC Converters with Digital Synchronous Rectifier and Copper Foil Planar Transformer in High-Output Current Applications

A High Power Density 48V-12V DCX with 3-D PCB Winding Transformer

High Power Density 48–12 V DCX with 3-D PCB Winding Transformer

A 3-D Winding Structure for Planar Transformers and Its Applications to LLC Resonant Converters

Modelling and optimization of planar transformers for high power density step-down DC–DC converters

LLC Resonant Transformer Distributed Parameters Abstraction

400V-to-48v GaN Modular LLC Resonant Converter with Planar Transformers

Multi-Domain Modeling and Design Optimization of Synchronous Rectifiers for SiC-Based High- Load-Current LLC Converter

Modeling and Prediction of Common-Mode Electromagnetic Interference for GaN-Based LLC Resonant Converters

Emi Modeling And Experiment Of A Gan Based Llc Half-Bridge Converter