Abstract:To fulfill the cooling capacity needs of cryomodule test facility for the Shanghai high repetition rate x-ray free electron laser (XFEL) and extreme light facility (SHINE), a 1 kW@2 K helium cryoplant has been implemented. The helium cryoplant comprises a warm compressor station and a cold box, where the former ensures a consistent supply of high-pressure helium to the latter. Normally, a proportional integral (PI) controller is employed to regulate both high-pressure and low-pressure levels in the compressor station, thereby ensuring stable operation of the cold box. However, under certain circumstances such as cold box turbine shutdown, both high-pressure and low-pressure can experience significant fluctuations, thereby posing a risk of severe safety accidents. Hence, it is imperative to conduct tests on pressure fluctuations in the aforementioned conditions. Due to the risks associated with conducting failure condition experiments, a dynamic simulation model of the warm compressor station was developed using EcosimPro software to perform failure testing. The simulation results of the compressor start process are compared with experimental data to validate the accuracy of the dynamic model. Subsequently, simulations of the valve fail open, turbine shutdown, and heat load shock conditions are conducted. Fuzzy PI (FPI) control is introduced to cope with fault conditions. The simulation results have verified the effectiveness of FPI control over conventional PI control, which can reduce maximum high pressure (HP) and recovery time under fault conditions.

Dynamic Simulation on Flow Characteristics of KSTAR PF Magnet Cryogenic Network

Effect of Flow Imbalance on the Operational Performance of the KSTAR PF1UL Magnets

Thermohydraulic Behaviors of Kstar Pf Superconducting Magnet System in Operation

Operating Temperature Margin and Heat Load in PF Superconducting Coils of KSTAR

Hydraulics of KSTAR Central Solenoid Model Coil 2nd Campaign

Thermohydraulic Characteristics of KSTAR Magnet System Using ITER-like Superconductors

Dynamic Simulation of Warm Compressor Station for SHINE Test Facility Cryoplant

Numerical Investigation of Quench Event in the Innermost Pair of the KSTAR Central Solenoids

AC Loss Analysis on the KSTAR PF1L Coil Based on the Long-Term Commissioning Shot Data

Prediction of Mechanical Behavior of the KSTAR CS Magnet Based on PF Coil Currents

Pressure Drop of CICC from Manufacturing Stage to Plasma Operation in KSTAR Superconducting Magnet System

Analysis of the Structural Behavior of the KSTAR TF Magnet for Safe Operation

Structural Behavior of KSTAR CS Magnet During Plasma Operation

Quench Simulation and Detection in Kstar Pf Magnet System

Qualification Test Results of the KSTAR Superconducting Coils from the Construction to the Commissioning Steps

1 FT / P 3-1 Commissioning Results of the KSTAR Cryogenic System

Design Updates and Thermo-Hydraulic Analysis of K-DEMO CS Magnets

Dynamic Simulation of A Superconducting Augmented Linear Propulsion System

Numerical evaluation of SmCo permanent magnet flowmeter measuring sodium flow in a low flow rate regime using FLUENT/MHD module

KS TAR PF 1 Coil Using the 4C Code

Numerical Study on the Flow and Heat Transfer Characteristics in CFETR Cryostat During a Loss of Vacuum