Abstract:In this study, the microstructural evolution, particularly precipitation behavior, and mechanical properties of cast Al–Li–Cu–Cd–Mn–Zr–Ti alloy during heat treatment are systematically examined. It provides a detailed discussion of the underlying mechanisms involved. After aging at 160 °C for 24 h, the alloy exhibits an excellent combination of strength and elongation, surpassing other cast Al–3Li–2Cu–X alloys reported in the literature. The microstructural evolution and mechanical properties of cast Al–Li–Cu–Cd–Mn–Zr–Ti alloy during heat treatment are investigated systematically. In these findings, it is shown that the as‐cast alloy exhibits fine and equiaxed grains. During the solid solution treatment, Al20Cu2Mn3 dispersoids effectively restrict grain growth, and reducing the solid solution time has a similar effect. Subsequently, the precipitation behavior and its effect on the mechanical properties during the aging process are revealed. Al3(Ti, Zr) particles are uniformly distributed throughout the matrix, acting as nucleation sites for δ′, θ′, and T1 precipitates. Overtime, δ′ precipitates gradually coarsen and decrease in number, and some δ′ precipitates attach to Al3(Ti, Zr) particles, forming core–shell Al3(Li, Ti, Zr) phases. At the same time, plate‐shaped θ′ and T1 precipitates emerge and coarsen. After aging at 160 °C for 24 h, the alloy exhibits an excellent combination of strength (yield strength =293.3 ± 4 MPa, ultimate tensile strength =468.0 ± 3 MPa) and ductility (elongation =9.6 ± 0.4%), surpassing those reported in other cast Al–3Li–2Cu–X alloys. Critically, the underlying mechanisms behind the microstructure and mechanical properties are discussed extensively, providing valuable insights for the advancement of cast Al–Li alloys.

Micro-mechanism of Simultaneous Improvement of Strength and Ductility of Squeeze-Cast Al–Cu Alloy

Precipitates strengthening mechanism of a new squeeze-cast Al-Cu-Li-Mn alloy with high strength and ductility

Effects of Heat Treatment on Microstructure and Mechanical Properties of Al-5Cu Alloys in Direct Squeezing Casting

Microstructure and mechanical properties of squeeze-cast Al−5.0Mg−3.0Zn−1.0Cu alloys in solution-treated and aged conditions

Microstructure and Mechanical Properties of Squeeze Cast Al-5 Mg-3Zn-1Cu-1Si Alloy along Cross Section

Developing high performance squeeze cast Al-Cu alloys with high Fe and Cu contents

Microstructure and Mechanical Properties of Cast Al-Li-Mg Alloy: Role of Cu Addition and Heat Treatment

Developing High Performance Mechanical Properties at Elevated Temperature in Squeeze Cast Al-Cu-Mn-Fe-Ni Alloys

Effects of under-aging treatment on microstructure and mechanical properties of squeeze-cast Al-Zn-Mg-Cu alloy

Effects of Adding Trace Modification Elements and Heat Treatment on the Strength and Toughness of AlSi8Cu2MgMn Alloy

Simultaneously Improved the Strength and Ductility of Cast Al-3Li-2Cu Alloy by Ti Addition and Heat Treatment

Microstructure and Mechanical Properties of Al-5Cu-4.5Mg-2.5Zn Squeeze Cast Alloy

Microstructural Evolution, Precipitation Behavior, and Mechanical Property Response of Cast Al–Li–Cu–Cd–Mn–Zr–Ti Alloy

Achieving excellent strength-ductility in Al–Si–Cu–Mg cast alloy via effective work hardening

Effect of Cu addition on microstructures and tensile properties of high-pressure die-casting Al-5.5Mg-0.7Mn alloy

Study on Microstructure Distribution of Al-Cu-Mg Alloy in Squeeze Casting Process

Microstructure and Mechanical Properties of Cast Al-Si-Cu-Mg-Ni-Cr Alloys: Effects of Time and Temperature on Two-Stage Solution Treatment and Ageing

Effects of Solution Treatment on the Microstructure, Tensile Properties, and Impact Toughness of an Al–5.0Mg–3.0Zn–1.0Cu Cast Alloy

Microstructures and Mechanical Properties of In-Situ Al<sub>3</sub>Ti/2024 Aluminum Matrix Composites Fabricated by Ultrasonic Treatment and Subsequent Squeeze Casting

Microstructures and Mechanical Properties of In-Situ Al 3 Ti/2024 Aluminum Matrix Composites Fabricated by Ultrasonic Treatment and Subsequent Squeeze Casting

Development of a novel high strength Al-Si-Cu-Ni alloy by combining micro-alloying and squeeze casting