Numerical Investigation on Boiling Crisis in a Full-Length 5 × 5 Fuel Assembly under Typical Pressurized Water Reactor Conditions
Xiang Zhang,Genglei Xia,Tenglong Cong,Minjun Peng
DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2024.125380
IF: 5.2
2024-01-01
International Journal of Heat and Mass Transfer
Abstract:Critical heat flux (CHF) presents a research priority in the Pressurized Water Reactor (PWR) safety, as it can lead to the severe accidents and release radioactive materials. In this study, a wall heat flux partition model, proposed by Demarly [1], was employed within the two-fluid model by Computational Fluid Dynamics (CFD) methodology to investigate the characteristics of CHF under typical PWR conditions. A multi-scale interface model was coupled to consider the interfacial transfers in bulk flow during flow regime transition. The models were validated by using experimental data on subcooled flow boiling, boiling crisis in vertical tubes, and rod bundles. The PWR sub-channel and bundle test (PSBT) benchmark, comprising a full-length 5 × 5 fuel assembly with three different types of spacers, was simulated in this study. The CHF value was evaluated, demonstrating an acceptable accuracy compared to the experimental data, with a deviation of less than 10 % in the selected conditions. The CHF location in the cross section was successfully predicted by CFD approach, while the axial location of CHF was underestimated than experimental measurement. Besides, the impacts of mixing vanes with different deflection angles on boiling heat transfer characteristics were analyzed, revealing the crucial role of mixing vanes in the distribution of vapor and dry-patch area fraction in both the circumferential and flow directions.