Abstract:The interlayer mechanical properties of composite asphalt pavement structure based on the base surface morphology of a concrete surface, adhesive layer material, working environment, and other factors are complex. As discussed, the field of mass production samples, combined with laboratory shear tests, confirms the rationality of shear test in the composite interlayer shear strength evaluation, presents the composite shear strength test method of the interlayer and corrected maximum interlaminar shear strength calculation formula, further introduces the evaluation method of anti-shear strength of composite pavement, and verifies the feasibility of the method based on the results that should be used for the project compared with the surface by sandblasting and chiseling treatment, adhesive layer material, working temperature, molding method, loading method, degree of pollution, and other factors on the interface shear strength of the adhesive layer. Results indicate that the surface roughness, temperature, test factors of molding methods, loading rate, and interlayer contamination strongly influence the bonding performance between layers and in the construction of the best texture depth value and maximum shear strength between layers. The best interface texture depth is decided by the factor waterproof bonding layer type, interface roughness method, and base geometry node of the base surface. The shear performance of SBS asphalt Synchronous Crushed Stone Seal Coat interlayer sensitivity to temperature is greater than that of polymer reaction-type waterproof adhesive material. The maximum shear strength calculation formula was introduced in the special road section and temperature correction coefficient. The interlayer temperature is 40℃ when the shear strength between layers is the main control index. The calculation results and evaluation index of consistency, shear-stress test method, and system method interlaminar shear strength evaluation can be used for pavement structure design and performance evaluation.

Analytical Calculations for Asphalt Pavement Considering Interlayer Performance

Structural Mechanics Analysis of Asphalt Pavement Using Large Stone Asphalt Mixture As Base

Elastoplastic Analysis of Asphalt Concrete Pavement

Fast Calculation Method for Mechanical Response at the Surface of Asphalt Pavement under an Elliptical Load

A Novel Approach for the Mechanical Response of Cement Concrete Pavement Structure Considering the Interlaminar Interface Shear Slip Effect

Implementation of Pseudo J-Integral Based Paris' Law for Fatigue Cracking in Asphalt Mixtures and Pavements

Dynamic analysis of asphalt pavement with reflective cracking on the soft clay ground

Energy-Based Kinetics Approach for Coupled Viscoplasticity and Viscofracture of Asphalt Mixtures

Inverse Engineering Stress-Dependent Resilient Moduli of Cement-Treated Base Materials in Asphalt Pavements Using Falling Weight Deflectometer

Viscoelasticity finite element analysis of interface bonding behaviors of asphalt pavement

Evaluation of the Coordination of Structural Layers in the Design of Asphalt Pavement

Pavement Mechanics Calculation Based on the Analytical Solution of Layered Viscoelastic System under Horizontal and Vertical Loads

Numerical and Experimental Analysis for the Interlayer Behavior of Double-Layered Asphalt Pavement Specimens

Viscoelastic Analysis of Asphalt Pavement with Reflective Cracks and Subjected to Dynamic Loading

Wave Propagation Approach for Elastic Transient Responses of Transversely Isotropic Asphalt Pavement under an Impact Load: A Semianalytical Solution

Analysis of Interface Behaviors and Permanent Deformation of Asphalt Pavement under Periodic Load

Analysis of the Fatigue Crack Propagation Process of the Stress-Absorption Layer of Composite Pavement Based on Reliability

Test and Evaluation Method of lnterlaminar Shear Performance of Composite Pavement

Numerical Simulation of Crack Propagation in Flexible Asphalt Pavements Based on Cohesive Zone Model Developed from Asphalt Mixtures

Application of Semi-Analytical Finite Element Method to Evaluate Asphalt Pavement Bearing Capacity

Analytical Solutions of Asphalt Pavement Responses under Moving Loads with Arbitrary Non-Uniform Tire Contact Pressure and Irregular Tire Imprint