Abstract:The compressive mechanical properties of concrete-based materials are strongly affected by the presence of additions in the mix and load application velocity. Fiber-Reinforced Rubberized Concrete (FRRC) was recently proposed in the literature as a concrete-based material with the aim of obtaining a ductile material with reduced environmental burden and characterized by excellent energy absorption performances during impact loading. FRRC joins and balances the advantages and drawbacks of Fiber Reinforce Concrete (FRC) and Rubberized Concrete (RuC). However, its behavior has rarely been investigated under dynamic loadings, although gaining sufficient knowledge on their high strain rate behavior is crucial for their full-scale application. This study aims to investigate the high-strain rate compressive behavior of FRRC with fine rubber aggregates and micro-straight steel fibers. Tests were performed using conventional quasi-static loading with a compressive testing machine and high-strain rate tests with a 080-mm Split Hopkinson Pressure Bar (SHPB) for strain rates up to 200 s(-1). The experimental program comprises the characterization of Plain Concrete (PC), FRC, RuC, and FRRC with a full test matrix (a total of 192 specimens) covering fiber contents up to 1.5% and rubber volume substitution ratios up to 30%. The micro-scale characterization of the material using SEM scans provided a complete understanding of the observed macro-scale behavior. A high-speed camera was used to capture the cracking development processes. The measurements both for quasi-static and dynamic tests indicate that the addition of fibers improves the ductility or toughness with a slight increase in the compressive strength and the substitution with rubber aggregates significantly reduces the compressive strength with improved ductility or toughness. The combination of fiber and rubber (FRRC) leads to a combination of the previously described single marginal effects. The dynamic tests reveal the marked strain rate dependency, although specimens with large rubber volume substitution were more sensitive to the strain rate effect within the considered test range. Based on the test data, data-driven models for strength reduction factor (SRF) and dynamic increase factor (DIF) are proposed for different types of FRRC. The image-based waveform discussion provides evidence of the "double-peak" phenomenon highlighting the different features of the observed signals and damage evolution. Ultimately, this study indicates that FRRC has an excellent high-strain rate compressive behavior and can be a promising material to be employed to protect structures against impact and blast loads.

The Strain Rate Effect on the Compression Properties of Basalt/Carbon Fiber Reinforced Composites

Experimental Study of Mechanical Properties of CFRP under Different Strain Rates and Temperatures

High-strain Rate Compressive Behavior of CFRP Confined Concrete: Large Diameter SHPB Tests

High-strain rate compressive behavior of Fiber-Reinforced Rubberized Concrete

Strain Rate‐dependent Deformation Behaviors of Multi‐layer Carbon Fiber Reinforced Polymer Laminates

Tensile Mechanical Properties of Basalt Fiber Reinforced Polymer Composite under Varying Strain Rates and Temperatures

Numerical Study for Damage of Carbon Fiber Reinforced Resin Matrix Laminates Related to Strain Rates

Effect of Strain Rate on the Transverse Tension and Compression Behavior of a Unidirectional Non-Crimp Fabric Carbon Fiber/Snap-Cure Epoxy Composite

Dynamic compressive impact behavior of CFRP composite under high strain rate loading

Review of Strain Rate Effects of Fiber-Reinforced Polymer Composites

Comparison of Tensile Properties of Carbon Fiber, Basalt Fiber and Hybrid Fiber Reinforced Composites under Various Strain Rates

Dynamic Enhancement Induced by Interface for Additively Manufactured Continuous Carbon Fiber Reinforced Composites

The compressive and tensile behavior of a 0/90 C fiber woven composite at high strain rates

Experimental Investigation on Strain Rate Effect of High-Performance Fiber Reinforced Cementitious Composites Subject to Dynamic Direct Tensile Loading

Mechanical properties and failure characteristics of CFRP under intermediate strain rates and varying temperatures

Experiment study on the strain rate behavior of carbon/epoxy composite materials

Experimental Study of In-plane Mechanical Properties of Carbon Fibre Woven Composite at Different Strain Rates

Compression Mechanics for Carbon-Fiberreinforced Epoxy Resin Composites Under Inplane and Out-Of-Plane Quasi-Static and Dynamic Loadings

Experimental study and theoretical analysis on dynamic mechanical properties of basalt fiber reinforced concrete

Dynamic Compressive Response and Failure Behaviour of CFRP Composites at High Strain Rates