Abstract:Carbon fiber reinforced polymer (CFRP) has been extensively used to strengthen structures owing to its outstanding mechanical properties. With an increasing threat from terrorist bombing attacks and accidental explosions, the application of CFRP has been extended to mitigate the effect of blast loading on structures. A better understanding of the dynamic material properties of CFRP/epoxy laminates at high strain rates is therefore needed for more reliable analysis and design of CFRP strengthened structures under dynamic loadings. In this study, the unidirectional tensile properties of CFRP (SikaWrap®-230C) and epoxy resin (Sikadur®-330) laminates is investigated experimentally over a wide range of strain rates. Quasi-static and low-speed tensile tests are conducted at strain rates varying from 7×10−5s−1 to 0.07s−1. Then, high-speed tensile tests are performed using a high-speed servo-hydraulic testing machine at strain rate from about 10s−1 to 240s−1. The testing results show that both the tensile strength and the stiffness of the CFRP/epoxy laminates are insensitive to loading speed when the strain rate is less than 50s−1. However, when strain rate is over 50s−1, both the tensile strength and the coupon stiffness increase with the increase of strain rate. High-speed camera images are used to assist inspecting the failure modes of CFRP/epoxy laminates. It is found that under high-strain rate tension CFRP/epoxy laminates fail differently from that at low-strain rate. The different failure mode is believed to contribute to the increment of laminate strength. The testing data are analyzed together with available testing results on CFRP/epoxy laminates at various strain rates. Empirical formulas of dynamic increase factor for CFRP material are derived for better prediction of material strength at various strain rates.

Strain Rate‐dependent Deformation Behaviors of Multi‐layer Carbon Fiber Reinforced Polymer Laminates

Experimental Study of Mechanical Properties of CFRP under Different Strain Rates and Temperatures

Numerical Study for Damage of Carbon Fiber Reinforced Resin Matrix Laminates Related to Strain Rates

Angle-ply orientation-dependent failure behaviors of carbon fiber reinforced polymer laminates

Experimental Study on the Tensile Behavior of Unidirectional and Plain Weave CFRP Laminates under Different Strain Rates

Tensile impact behaviors and damage mechanism of woven carbon fiber-reinforced-polymer laminates considering adiabatic shear band

Low-velocity impact behavior and residual tensile strength of CFRP laminates

Dynamic Enhancement Induced by Interface for Additively Manufactured Continuous Carbon Fiber Reinforced Composites

Experiment study on the strain rate behavior of carbon/epoxy composite materials

Static and Dynamic Material Properties of CFRP/epoxy Laminates

Rate-related Study on the Ply Orientation of Carbon Fiber Reinforced Epoxy Composite Laminates

Characterizing Multi Mechanical Behaviors for Epoxy-Like Materials under Wide Strain Rate Range

Mechanical properties and failure characteristics of CFRP under intermediate strain rates and varying temperatures

Rate-dependent mechanical and self-monitoring behaviors of 3D printed continuous carbon fiber composites

The Strain Rate Effect on the Compression Properties of Basalt/Carbon Fiber Reinforced Composites

Effect of Strain Rate on Tensile Behavior of Carbon Fiber Reinforced Aluminum Laminates

Determination of the Material Model and Damage Parameters of a Carbon Fiber Reinforced Laminated Epoxy Composite for High Strain Rate Planar Compression

Modeling and Testing Strain Rate-Dependent Tensile Strength of Carbon/Epoxy Composites

Static and Dynamic Mechanical Properties of Carbon Fiber Reinforced Polymer with Different Stacking Sequences

Strain rate dependence of 3D printed continuous fiber reinforced composites