Abstract:Numerous studies have demonstrated that under low-velocity, low-energy impact conditions, although the surface damage to fiber-reinforced composite laminates may be minimal, significant internal damage can occur. Consequently, a progressive damage finite element model was specifically developed for thermoplastic carbon fiber-reinforced composite laminates subjected to low-speed impact loads, with the objective of analyzing the damage behavior of laminates under impacts of varying energy levels. The model utilizes a three-dimensional Hashin criterion for predicting intralayer damage initiation, with cohesive elements based on bilinear traction-separation law for predicting interlaminar delamination initiation, and incorporates a damage constitutive model based on equivalent displacement to characterize fiber damage evolution, along with the B-K criterion for interlaminar damage evolution. The impact response of laminates at energy levels of 5 J, 10 J, 15 J, 20 J, and 25 J was analyzed through numerical simulation, drop-hammer experiments, and XCT non-destructive testing. The results indicated that the simulation outcomes closely correspond with the experimental findings, with both the predicted peak error and absorbed energy error maintained within a 5% margin, and the trends of the mechanical response curves aligning closely with the experimental data. The damage patterns predicted by the numerical simulations were consistent with the results obtained from XCT scans. The study additionally revealed that the impact damage of the laminates primarily stems from interlaminar delamination and intralayer tensile failure. Initial damage typically presents as internal delamination; hence, enhancing interlaminar bonding performance can significantly augment the overall load-bearing capacity of the laminate.

Numerical Study for Damage of Carbon Fiber Reinforced Resin Matrix Laminates Related to Strain Rates

Continuum Damage Modeling and Progressive Failure Analysis of Carbon Fiber/epoxy Composite Pressure Vessel

Experimental Study on Carbon Fiber/epoxy Laminates under Dynamic Tensile and Their Damage Analysis

A Numerical Study on the Influence of Strain Rate in Finite-Discrete Element Simulation of the Perforation Behaviour of Woven Composites

A Nonlinear Mixed-Mod Model Oriented Low Velocity Impact Damage of FRP

Experiment Study on the Strain Rate Behavior of Carbon/epoxy Composite Materials

Review of Strain Rate Effects of Fiber-Reinforced Polymer Composites

A New Three-Dimensional Progressive Damage Model for Fiber-Reinforced Polymer Laminates and Its Applications to Large Open-Hole Panels

A progressive damage model for carbon fiber-reinforced polymer laminates subjected to fastener pull-through failure

Modeling and Testing Strain Rate-Dependent Tensile Strength of Carbon/Epoxy Composites

Numerical Simulation of Strain Rate Effect on the Inelastic Behavior of Metal Matrix Composites

Rate-dependent mechanical and self-monitoring behaviors of 3D printed continuous carbon fiber composites

Experimental and Simulation Study on Failure of Thermoplastic Carbon Fiber Composite Laminates under Low-Velocity Impact

Strain Rate Dependent Deformation of a Polymer Matrix Composite with Different Microstructures Subjected to Off-Axis Loading

A Method for Plotting Failure Envelopes of Unidirectional Polymer Composite Materials under Different Strain Rates

Dynamic Response with Strain Rate Dependence of Composite Laminates

Novel 2D strain-rate-dependent lamina-based and RVE/phase-based progressive fatigue damage criteria for randomly loaded multi-layer fiber-reinforced composites

Explanation of Strain Softening and Numerical Modeling to the Failure Process of Laminated Composite Material

Numerical Investigation into Using Coarse Meshes to Predict Damage Behaviors of Laminated Composites Subjected to Low-Velocity Impact

Progressive Failure Analysis of Carbon Fiber/epoxy Composite Laminates Using Continuum Damage Mechanics