Abstract:In vessel retention (IVR) is one of the key severe accident mitigation strategies to maintain reactor pressure vessel (RPV) integrity. IVR designs utilize the reactor pressure vessel lower head to contain molten fuel and rely on external reactor vessel cooling (ERVC) to remove decay heat. The capacity of ERVC is limited by the critical heat flux (CHF) of flow boiling on the outside of the reactor vessel surface. Therefore, the determination of critical heat flux (CHF) is crucial to predict whether the adoption of IVR would be successful in mitigating severe accidents. In 1999, Celeta et.al proposed a superheated layer vapor replenishment model. In this model they postulated that CHF would occur when the superheated layer was occupied by the vapor blanket coming into contact with the heated wall and they successfully predicted the critical heat flux in subcooled water flow boiling under high mass flux, high liquid subcooling and low/medium pressure conditions. To evaluate the practicability of this model in predicting CHF under IVR conditions, CHF experiments were performed under natural circulation conditions on the experiment facility "Test of External Vessel Surface with Enhanced Cooling" (TESEC). Experiments are conducted in a 30 mm wide, 61mm high rectangular flow channel with a 200 mm long heated surface along the flow direction. Two quartz windows are installed at the sidewalls of the flow channel for visualization. In order to simulate various positions of the reactor lower head, experiments at different inclination angles of the test section were conducted. The high speed visualization data at CHF point at various inclination angles were processed and analyzed by a MATLAB code developed by the author. The vapor blanket thickness at various inclination angles was measured from the visualization data and was also predicted by the Celeta model. By using geometry data from high speed images, CHF values were calculated by Celeta model and compared with the experimental results at various inclination angles. Limitations of the Celeta model in adaptation of predicting CHF under IVR conditions were further discussed.

Cooling Time and CHF Enhancement of Reactor Vessel Cooling Process by Flame Sprayed Porous Coating in Different Orientations

Cold sprayed superhydrophilic porous metallic coating for enhancing the critical heat flux of the pressurized water-cooled reactor vessel in nuclear power plants

Experimental Study on CHF Using a Full Scale 2-D Curved Test Section with Additives and SA508 Heater for IVR-ERVC Strategy

Enhancement of the Critical Heat Flux for Downward-Facing Saturated Pool Boiling on the Reticular Hollow Shell Structure Surfaces

Experimental Research on Influence of Real Surface Material and Aging Effect on ERVC-CHF of RPV

CHF enhancement of downward-facing saturated pool boiling on the SCGS-modified surfaces with multi-scale conical pin fin structures

Effect of Grooves on Nucleate Boiling Heat Transfer from Downward Facing Hemispherical Surface

Experimental study on the CHF enhancement effect of nanofluids on the oxidized low carbon steel surface

The Effects of Surface Orientation, Heater Size, Wettability, and Subcooling on the Critical Heat Flux Enhancement in Pool Boiling

Enhancement of critical heat flux with additive-manufactured heat-transfer surface

A CHF Correlation and Flow Pattern Observation on a Downward-Facing Boiling Surface

Effects of Orientation and Structure Geometry on Boiling Heat Transfer for Downward Facing IGTAC Surfaces

Experimental Investigation of 3-D ERVC Process for IVR Strategy – CHF Limits and Visualization of Boiling Phenomena

CHF experiments and prediction model under subcooling flow boiling condition in passive IVR-ERVC system

Flow boiling experiments for CHF evaluation under downward-facing heating including flow visualization: Effects of pressure, orientation, mass flux, and local quality

Prediction Of subcooled water flow boiling critical heat flux (CHF) at low pressure

Numerical Investigation on the Thermal-Hydraulic Characteristics near a Corroded Lower Head of the Reactor Vessel During IVR-ERVC

Experimental study of the key factors of improving CHF to support CAP1400 IVR strategy

CFD study on flow-boiling characteristics and predicting critical heat flux under natural circulation conditions of IVR-ERVC

A new preparing method and performances of FeAl/Al2O3 tritium permeation barrier

Effect of Different Conditions on Heat Transfer Characteristics of Molten Zr-Stainless Steel Pool with Water Injection