Abstract:In this study, by conducting cryogenic rolling (CR) followed by short-term annealing (CRA), we achieved the annealing-induced hardening in a single-phase FCC FeCoCrNiMo 0.2 high-entropy alloy by introducing multiple heterostructures structures. Through this approach, the yield strength, ultimate tensile strength and tensile fracture elongation of CRA alloy were increased from 1116.8 MPa to 1286.1 MPa, 1363.2 MPa to 1576.3 MPa and 5.4% to 6.9%, respectively. Furthermore, a broader steady state of strain softening behavior was found in the CRA alloy, which is attributed to the additional strengthening and hardening effects resulting from high density of deformation nanotwins and phase transformations. Additionally, the research results show that the ultra-high strength and sufficient ductility of CRA alloy are attributed to the synergistic effect of multiple mechanisms, such as strengthening induced by heterogeneous microstructure of σ precipitate/HCP phase/FCC matrix phase, and high work hardening ability caused by the heterogeneity of high density deformation nanotwins, geometrically necessary dislocations (GND), stacking faults (SFs) and Lomer-Cottrell locks (L-C locks) nano-scale defects. This work provides useful insights for alloys that involves multiple heterogeneous microstructures strengthening and provides a promising approach for the design and manufacture of high-strength structural materials.

Phase transformation-induced strengthening and multistage strain hardening in double-gradient-structured high-entropy alloys

Inherent and Multiple Strain Hardening Imparting Synergistic Ultrahigh Strength and Ductility in a Low Stacking Faulted Heterogeneous High-Entropy Alloy

Real-time observations of TRIP-induced ultrahigh strain hardening in a dual-phase CrMnFeCoNi high-entropy alloy

Unusual phase transformation and novel hardening mechanisms upon impact loading in a medium entropy alloy with dual heterogeneous structure

Microstructural Evolution and Elevated-Temperature Strengthening Mechanism of Co-free FeCrMnNiV0.2Alx High-Entropy Alloys During Annealing

Achieving High Strength and Deformability in a High Entropy Alloy Containing the Multiscale Phase Structure

Tensile behaviors and hetero-deformation-induced hardening mechanisms in medium entropy alloys with dual gradients of grain size and coherent nanoprecipitate

High strength and ductility in a dual-phase hetero-structured AlCoCrFeNi2.1 eutectic high-entropy alloy by powder metallurgy

Hierarchical Grain Size and Nanotwin Gradient Microstructure for Improved Mechanical Properties of a Non-Equiatomic CoCrFeMnNi High-Entropy Alloy

Breaking the Strength-Ductility Trade-off Via Heterogeneous Structure in FeCoCrNiMo0.2 High-Entropy Alloy

Annealing-induced Multi-Heterogeneous Microstructure Strengthening in FeCoCrNiMo0.2 High-Entropy Alloys

Annealing-induced multi-heterogeneous microstructure strengthening in FeCoCrNiMo 0.2 high-entropy alloys

Microstructure and Deformation Mechanism of Dual-Phase Al0.5CoCrNiFe High-Entropy Alloy

Twin-induced transformation strengthening of CoCrNi-based medium-entropy alloy with a gradient nanostructure

Strain delocalization in a gradient-structured high entropy alloy under uniaxial tensile loading

Transformation-enhanced Strength and Ductility in a FeCoCrNiMn Dual Phase High-Entropy Alloy

Interplay between single phase solid solution strengthening and multi-phase strengthening in the same high entropy alloy

Phase Volume Fraction-Dependent Strengthening in a Nano-Laminated Dual-Phase High-Entropy Alloy

Strengthening the FeCoCrNiMo0.15 high entropy alloy by a gradient structure

Tensile properties and strengthening mechanisms of eutectic high-entropy alloys induced by heterostructure

Strengthening mechanism of CrCoNi medium-entropy alloy from the partially recrystallized structure to the fully recrystallized heterogeneous structure