Abstract:Multiple deformation mechanisms have been utilized to overcome the strength-ductility trade-off in high entropy alloys (HEAs), especially at low temperatures and deformation conditions. To trigger the multiple deformation mechanisms at room temperature, the multiphase heterostructure Co30Cr30Fe18Ni18Mo4 HEA was developed at moderate temperatures (600 degrees C-1100 degrees C) and short time (1 h-8 h) annealing treatment. The phase formation, microstructure evolution, and tensile properties of as-annealed Co30Cr30Fe18Ni18Mo4 HEA were systematically investigated. At 600 degrees C for 2 h (A600-2), the alloy is consisted of the face-centered-cubic (FCC) phase and rich (Cr, Mo) primary a phase. The fine needle-shaped secondary a phase precipitates at 800 degrees C. With the increase of annealing temperatures and times, the volume fraction of secondary a phase increases. FCC matrix, metastable secondary a phase, and primary a phase are gradient heterostructure. The thermodynamic metastable of the FCC matrix and the sluggish diffusion kinetics of elements induce the formation of fine and metastable secondary a phase at the thermal driving force. The as-annealed alloy exhibits high yield strength and applicable plasticity with the increase of the secondary a phase. Hetero-deformation-induced (HDI) strengthening is induced by piled-up dislocations at the a/FCC interface. The dominant roles in the improvement of global yield strength are precipitation strengthening and back-stress strengthening. The back stress, stacking faults (SFs), and twins are generated in the soft FCC matrix, and a few SFs are observed in the metastable secondary a phase, which induces high strain hardening ability. The cracks initiated in the hard primary a phase are passivated by the FCC matrix and metastable secondary a phase. TWIP, SFs, and HDI strengthening multiple deformation mechanisms contribute to improving strength.

Interplay between single phase solid solution strengthening and multi-phase strengthening in the same high entropy alloy

Inherent and Multiple Strain Hardening Imparting Synergistic Ultrahigh Strength and Ductility in a Low Stacking Faulted Heterogeneous High-Entropy Alloy

Phase Volume Fraction-Dependent Strengthening in a Nano-Laminated Dual-Phase High-Entropy Alloy

Multiscale-phase-driven strength-ductility synergy in Fe3Cr2CoNiAlx high entropy alloys

Nanoprecipitate and stacking fault-induced high strength and ductility in a multiscale heterostructured high-entropy alloy

Achieving well-balanced strength and ductility via dual nanoscale precipitate structures in Co-free high-entropy alloys

Tuning the microstructure and strengthening mechanism of the CoCrFeNi high-entropy alloy via doping metalloid and interstitial elements

Simultaneously enhancing the tensile strength and ductility of high entropy alloys by nanoscale precipitates/fillers

Ductile CoCrFeNiMox High Entropy Alloys Strengthened by Hard Intermetallic Phases

Microstructure Evolution and Strengthening Mechanisms in Ni36Co30Cr11Fe11Al12-Nb High Entropy Alloys

Phase transformation and strengthening mechanisms of nanostructured high-entropy alloys

Achieving High Strength and High Ductility in a High-Entropy Alloy by a Combination of a Heterogeneous Grain Structure and Oxide-Dispersion Strengthening

Microstructure evolution and strengthening mechanisms in Ni36Co30Cr11Fe11Al12-xNbx high entropy alloys

A high-entropy alloy with hierarchical nanoprecipitates and ultrahigh strength

Theory-guided design of high-entropy alloys with enhanced strength-ductility synergy

Tensile properties and strengthening mechanisms of eutectic high-entropy alloys induced by heterostructure

Strengthening Mechanisms in CoCrFeNiX0.4 (Al, Nb, Ta) High Entropy Alloys Fabricated by Powder Plasma Arc Additive Manufacturing

Nanoprecipitate‐Strengthened High‐Entropy Alloys

Microstructural Origins for a Strong and Ductile Al0.1CoCrFeNi High-Entropy Alloy with Ultrafine Grains

Hetero-deformation-induced Strengthening Behavior of As-Annealed Co30Cr30Fe18Ni18Mo4 High Entropy Alloy by Metastable Σ Phase

Developing harmonic structure in CoCrFeMnNi high entropy alloy to enhance mechanical properties via powder metallurgy approach