Polyvinyl Alcohol Fiber Length Optimization for High Ductility Cementitious Composites with Different Compressive Strength Grades

Ding Cong,Guo Liping,Ren Jinming,Wang Yongming,Li Xinyu,Yu Bing,Gao Yuan,Liu Wanpeng

DOI: https://doi.org/10.1155/2021/7183288

IF: 2.0981

2021-01-01

Advances in Materials Science and Engineering

Abstract:The fiber length has a significant impact on the fiber bridging capacity and the mechanical properties of high ductility cementitious composites (HDCCs), which is related to fiber/matrix interfacial bonding. However, this fundamental knowledge of HDCCs design has rarely been investigated systematically. To this end, this study deeply investigates the effect of the fiber length on the bridging stress and the complementary energy with various fiber/matrix interfacial bonds in theory. Then, the mechanical performances of HDCCs with various fiber lengths and compressive strengths were evaluated experimentally. In micromechanical design, longer fibers can achieve stronger bridging stress and more sufficient complementary energy regardless of the fiber/matrix interfacial bonding properties. However, it should be noted that the increase in bridging capacity was quite slow for the overlong fibers and excessive interfacial bonding. The experiments indicated that overlong fibers (18mm and 24mm) easily twined on the mixer blade and were hard to disperse evenly. The HDCCs with shorter fibers displayed better workability. The compressive strength was less affected by the fiber length, and most striking differences were less than 5.0%, while the flexural properties and the tensile properties first increased and then decreased when the fiber length ranged from 6mm to 24mm. Consequently, the fibers with lengths of 9mm and the fibers with lengths of 12mm were better candidates for the HDCCs with compressive strengths of 30MPa to 80MPa, and fibers with lengths of 9mm caused the HDCCs to exhibit higher ductility properties in general.