Abstract:This work evaluated the synergistic effects of silica fume (SF) and ground granulated blast furnace slag (GGBS) binders on the microstructure and mechanical behavior of Ultra-High-Strength and High-Ductility Cementitious Composites (UHS-HDCC). The potential mechanisms of the synergistic effects of GGBS and SF on the fresh flow, mechanical properties, and microstructure of UHS-HDCC were investigated. The results indicated that the use of GGBS instead of SF could effectively improve the flowability of fresh mortar and UHS-HDCC mixtures. The hydration process of cement and the heat of hydration were delayed and reduced when the content of GGBS was below 25 %. Moreover, reducing the SF while increasing the GGBS reduced the compressive strength of the composites but had little effect on the flexural strength. The compressive strength of all specimens remained above 120 MPa. All specimens achieved strain-hardening behavior after the initial cracking of the matrix in uniaxial tension and four-point bending, and had a variety of cracking characteristics. Furthermore, the range of ultimate tensile strain capacity and mid-span deflection were 3.26 %-5.79 % and 16.73 mm-33.05 mm, respectively. The S10G30 specimen reached a maximum tensile strain energy of 414.6 kJ/m3. As the level of GGBS replacing SF increased, the number of cracks in the tensile region or the compressive bending surface of UHS-HDCC specimens increased, while the crack width and crack spacing decreased. The relatively smooth sidewalls of the fiber tunnels and fiber exit points meant that matrix fragments attached to the fiber surfaces were caused by matrix fragments generated throughout the matrix cracking process. Besides, the interfacial frictional stress and slip hardening coefficient acquired from the single fiber pullout test reduced with increasing levels of GGBS replacing SF.

Effects of aggregate type and fibre on properties of high ductility cementitious composites

Effect of fiber type on the bending and uniaxial tensile properties of high-strength high-ductility cementitious composites

Influence of Fiber Type on Mechanical Properties of Lightweight Cement-Based Composites

Rheological property and fiber dispersion of high ductility cementitious composites

Effect of Fiber Type and Fiber Hybrids on Strain-Hardening and Multiple Cracking Properties of the Ultra-High Performance Cementitious Composites under Uniaxial Loads

Polyvinyl Alcohol Fiber Length Optimization for High Ductility Cementitious Composites with Different Compressive Strength Grades

Effect of PE Fiber Content on Mechanical Behavior of Cementitious Composite

Correlation of Rheological Properties with Porosity and Strain Hardening Criterion of High Ductility Cementitious Composites

Micromechanical Behavior and Micromorphology of Single PVA Fiber Pullout

Effects of hybrid fibers on properties of desulfurized gypsum-based composite cementitious materials

Multiscale Insights on Enhancing Tensile Properties of Ultra-High Performance Cementitious Composite with Hybrid Steel and Polymeric Fibers

Micromechanics Theory Guidelines and Method Exploration for Surface Treatment of PVA Fibers Used in High-Ductility Cementitious Composites

Comparative study on effects of steel fiber and imitation steel fiber on dynamic tensile properties of ultra-high-performance cementitious composites

Tensile Performance of High Ductile Fiber Reinforced Cementitious Composite

Experimental research on ductility enhancement of ultra-high performance concrete incorporation with basalt fibre, polypropylene fibre and glass fibre

Experiment Study On Toughness Of Fiber Reinforced High Performance Lightweight Aggregate Concrete

Synergistic Effects of Silica Fume and Slag on the Microstructure and Mechanical Behaviors of Ultra-High-strength and High-Ductility Cementitious Composites

Effects of CaCO3 Whisker, Hybrid Fiber Content and Size on Uniaxial Compressive Behavior of Cementitious Composites

Experimental study on the mechanical properties of high performance polyvinyl alcohol fiber reinforced cementitious composites

Physical and Mechanical Properties of Ultra-High Strength and High Ductility Cementitious Composites

Fiber Synergy of Polyvinyl Alcohol and Steel Fibers on the Bond Behavior of a Hybrid Fiber-Reinforced Cementitious Composite