Abstract:Understanding of anisotropy mechanism for Pilger rolling Ti80 (Ti-6Al-3 Nb-2Zr-1Mo) alloy pipe is of great significance to improve its service performance. In this work, the strength, plasticity and fracture mode of Ti80 alloy pipe with rolling texture in three different directions (RD, TD and 45°) were comparatively investigated. Firstly, the tensile strength is in the descending order of TD, RD and 45°, and plasticity shows the opposite trend. According to the statistics of a large number of deformed grains, the underlying mechanism of anisotropy was revealed by analyzing the slip activation, slip transfer, damage and fracture for three different loading directions. The results show that prismatic slip is the dominant deformation mechanism in RD, and the basal slip is mostly activated in TD. In 45°, the number of activated prismatic slip and basal slip is almost the same. Meanwhile, the pyramidal slip plays an important role in accommodating the plastic deformation. A method for predicting the yield strength was established based on the critical resolved shear stress (CRSS) of basal slip, prismatic slip and pyramidal slip, accompanying by different SFs distributions of activated slip systems. Subsequently, slip transfer, which can relieve the incompatible deformation, occurred between adjacent α grains when the slip transfer factor (m) and Schmidt factor (SF) are at a high value. Slip transfer was prone to occurring between the same slip systems, such as between prismatic slip or basal slip. However, it is discovered that the slip transfer between prismatic slip and basal slip is also likely to occur, when the adjacent α grains maintain 90° variant relationship. The slip transfer between 90° variants in 45° have higher probability than that in RD and TD due to high SFs of activated basal slip and prism slip, resulting better plasticity. Lastly, the micro-defects are uniformly distributed and the fracture mode is microvoids coalescence in RD. More basal slip induces the cleavage cracks and cause the shear fracture in 45°. In TD, a mixed fracture mode of microvoids coalescence and cleavage is presented due to the heterogeneous deformation.

Analysis of Anisotropy Mechanism in Relation with Slip Activity in Near Α Titanium Alloy Pipe after Pilger Cold Rolling

Analysis of Anisotropy Mechanism in the Mechanical Property of Titanium Alloy Tube Formed Through Hot Flow Forming

Microstructure Evolution of Ti-6Al-2Zr-1Mo-1V Alloy and Its Mechanism in Multi-Pass Flow Forming

Development of Microstructural Inhomogeneity in Multi-Pass Flow Forming of TA15 Alloy Cylindrical Parts

The Action Mechanism of Rolling Texture on the Anisotropic Behavior of a Pure Titanium Plate

Mesoscale Deformation Mechanisms in Relation with Slip and Grain Boundary Sliding in TA15 Titanium Alloy During Tensile Deformation

Microstructure Evolution of Ti-6Al-4V with Periodic Thermal Parameters During Axial Closed Die Rolling Process

Hot and Cold Rolling of a Novel Near-Α Titanium Alloy: Mechanical Properties and Underlying Deformation Mechanism

Texture evolution and slip mode of a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr dual-phase alloy during cold rolling based on multiscale crystal plasticity finite element model

Characterization and Analysis of Strain Heterogeneity at Grain-Scale of Titanium Alloy with Tri-Modal Microstructure During Tensile Deformation

Slip dominated planar anisotropy of low cycle fatigue behavior of commercially pure titanium

Micromechanical Behaviour of TA15 Alloy Cylindrical Parts Processed by Multi-Pass Flow Forming

Calculation of the CRSS Ratios of Ti80 Alloy and Its Application in Prediction of Texture in Pilger Cold Rolling

In-situ Investigation of Tensile Anisotropy Mechanism in an Advanced Ti2AlNb-based Alloy Associated with CRSS Ratio and Damage Model

Investigation on Anisotropic Mechanical Behavior of Ti-6Al-4V Alloy Via Schmid Factor and Kernel Average Misorientation Distribution

Effects of rolling reduction on Burgers orientation relationship and slip behavior of a Ti–5.5Mo–7.2Al–4.5Zr–2.6Sn–2.1Cr alloy

Transverse texture weakening and anisotropy improvement of Ti-6Al-4V alloy sheet via asymmetric rolling and static recrystallization annealing

Deformation Behaviors of a Hot Rolled Near-Β Ti-5Al-5Mo-5V-1Cr-1Fe Alloy

Plastic deformation mode and α/β slip transfer of Ti–5Al-2.5Cr-0.5Fe-4.5Mo–1Sn–2Zr–3Zn titanium alloy at room temperature

Effect of rolling path on microstructure and mechanical properties of Ti-6242 alloy

Study of Microstructure and Mechanical Properties by Torsional Behavior in Axial Closed Die Rolling Forming