Abstract:Ethylene is one of the largest chemical products in the world, and its global demand increases significantly every year. At present, ethylene is mainly produced commercially through steam cracking of naphtha or alkane feedstocks. Catalytic dehydrogenation of ethane can effectively reduce energy loss of steam cracking. The transition metal Ni is a metal element with abundant reserves on the earth. It is widely used in the catalytic fields of hydrodesulphurization and reforming hydrogen production. However, there are few studies on Ni-based catalysts in alkanes dehydrogenation; therefore, three kinds of Ni-based supported catalysts, namely spinel decomposition-type, impregnation-type and perovskite precipitation-type, were prepared by different methods and explored for their performance in ethane dehydrogenation at 700 C in C2H6-N-2 atmosphere at 50 mL.min(-1). The results show that the spinel decomposition-type catalyst Ni1-xCuxCr2O4 prepared by glycine combustion method formed Ni-Cu alloy particles on the surface of Cr2O3 after reduction, which effectively passivated the C-C bond breaking activity of Ni and improved the selectivity of ethylene. The effect of Cu addition can be explained in geometric effect and electronic effect When the Ni content was too high, the Ni particles could not be effectively dispersed, forming large metal clusters and resulting in excessive cracking of ethane and low ethylene selectivity. The impregnation-type catalyst NixMy/Al2O3 (M=Cu or Ag) had a large specific surface area and dispersed surface active sites, but the active metal particles were weakly interacted with the support and unstable at high temperatures; Cu or Ag forming an alloy with Ni effectively unproved the selectivity of ethylene with Ag superior to Cu. The perovskite precipitation-type catalyst LaCr1-xNixO3 (LCNi-100x) precipitated unifonn and fine Ni particles in a reducing atmosphere, which were strongly bonded to the support and demonstrated high carbon deposition resistance and high stability; the reduced LCNi-15 (R-LCNi-15 containing 15% Ni) showed the best catalytic performance with the highest ethylene yield (24%), and high carbon deposition resistance and stability compared to commercial 13% CrOx/Al2O3. Moreover, carbon-deposited R-LCNi-15 can restore catalytic activity by oxidation regeneration.

Performance and Improvement of Ni-based Catalysts for Ethane Dehydrogenation

Ethane dehydrogenation over the g-C3N4 supported metal single-atom catalysts to enhance reactivity and coking-resistance ability

Supported Ni Catalysts: Simple Vapor Deposition Preparation Method and Improved Catalytic Performance for Oxidative Dehydrogenation of Ethane

Pursuing Complete and Stable Steam Reforming of N-Dodecane over Nickel Catalysts at Low Temperature and High LHSV

Robust Ni x Sn/ZSM-12 Catalysts with Zeolite as the Support and Sn as the Promoter for Acetylene Semi-hydrogenation

Plasma‐treated Ni‐Al‐O Catalysts with Variable Physicochemical Properties for the Oxidative Dehydrogenation of Ethane

Unveiling the Origin of Enhanced Catalytic Performance of NiCu Alloy for Semi-Hydrogenation of Acetylene

Atomically Dispersed Ni-Based Anti-Coking Catalysts for Methanol Dehydrogenation in a Fixed-Bed Reactor

Improved performance of Ni/Al2O3 catalyst deriving from the hydrotalcite precursor synthesized on Al2O3 support for dry reforming of methane

Effect of Oxide Support on Catalytic Performance of FeNi‐based Catalysts for CO2‐assisted Oxidative Dehydrogenation of Ethane

N-doped porous carbon supported Ni catalysts derived from modified Ni-MOF-74 for highly effective and selective catalytic hydrodechlorination of 1,2-dichloroethane to ethylene

About the nickel amount deposited on silica-alumina for ethylene production through oxidative dehydrogenation of ethane

Highly Dispersed Ni Nanoparticles Supported by Porous Al2O3 Rods for Catalytic Dry Reforming of Methane

Supported FexNiy catalysts for the co-activation of CO2 and small alkanes

A Novel Promoting Effect of Chelating Ligand on the Dispersion of Ni Species over Ni/SBA-15 Catalyst for Dry Reforming of Methane

Efficient and Stable Ni-Cu Catalysts for Ex Situ Catalytic Pyrolysis Vapor Upgrading of Oleic Acid into Hydrocarbon: Effect of Catalyst Support, Process Parameters and Ni-to-Cu Mixed Ratio

Improving Coking Resistance and Catalytic Performance of Ni Catalyst from LaNiO3 Perovskite by Dispersion on SBA-15 Mesoporous Silica for Hydrogen Production by Steam Reforming of Ethanol

Ni/x%Nb2O5/Al2O3 Catalysts Prepared via Coprecipitation-Wet Impregnation Method for Methane Steam Reforming

Deactivation origins and stability-enhancing strategies of Sn/SiO 2 catalysts for ethane dehydrogenation

Highly Stable Ni−B/Honeycomb−Structural Al2O3 Catalysts for Dry Reforming of Methane

Performance Study of Ni/Si-MCM-41 Catalysts, Synthesized with Different Silica Sources, and their Application on Methane Dry Reform to Produce Green Hydrogen