Abstract:This paper describes an experimental test program and theoretical analysis which examines the reinforcing in flexure of glued laminated timber (glulam) beams using fiber reinforced polymer (FRP) and steel materials. A series of four-point bending tests were conducted till failure on both unreinforced and reinforced Douglas fir glulam beams in a simply-supported scheme. The focus of this research was to evaluate the effects of reinforcing materials, reinforcement ratio and arrangement on the flexural behavior. Test results showed that the flexural capacity, flexural global stiffness and timber tensile strain at failure were all improved considerably for reinforced timber beams when compared to the unreinforced control beams, in which the average improvement reached 56.3%, 27.5% and 49.4%, respectively. On the bases of the experimental results, a theoretical model was proposed to predict the flexural capacity and flexural stiffness of the reinforced timber beams. Most of the differences between theoretical and experimental results for both flexural capacity and flexural stiffness were within 10.0%, which showed a high accuracy of the proposed model. Subsequently a parametric analysis, which includes the axial stiffness ratio of reinforcement to timber, the relative location of tensile reinforcement, and the strength ratio of reinforced timber between flexural tension and compression, was undertaken to investigate the effects of the influential factors for both flexural capacity and flexural stiffness.

An Experimental and Analytical Study on the Bending Performance of CFRP-Reinforced Glulam Beams

Flexural behavior of FRP reinforced glubam beams

The Flexural Behavior of Cross Laminated Bamboo and Timber (CLBT) and Cross Laminated Timber (CLT) Beams

Prestressed Glulam Beams Reinforced with CFRP Bars

Investigation on Flexural Performance of RC Beams Flexurally Strengthened by Side-bonded CFRP Laminates

Flexural Behavior of Frp and Steel Reinforced Glulam Beams: Experimental and Theoretical Evaluation

Bending Performance of Glubam Beams Made with Different Processes

Pull-Out Behavior of CFRP Bars in Glued-In Glubam Joints

Study on flexural behavior of FRP reinforced glulam beams

Behavior of Preloaded RC Beams Strengthened with CFRP Laminates

Effect of sustaining load level on flexural behavior of RC beams retrofitted with CFRP sheets

Study on Flexural Behavior of Timber Beams Strengthened with FRP

Study on Flexural Behaviour of Glulam Beams Reinforced by Near Surface Mounted (NSM) CFRP Laminates

Study on flexural performance of cracked RC beams retrofitted with CFRP sheets

Analysis Study on Flexural Deflection of FRP Reinforced Glulam Beams

EXPERIMENTAL STUDY ON FLEXIONAL BEHAVIOR OF TIMBER BEAM STRENGTHENED WITH FRP

Bending performance of domestic larch cross-laminated timber reinforced with fiber-reinforced polymer

Short-Term Flexural Behavior of Prestressed Glulam Beams Reinforced with Curved Tendons

Experimental and Theoretical Investigation on Shear Behaviour of Small-Scale Timber Beams Strengthened with Fiber-Reinforced Polymer Composites

INVESTIGATION OF THE PERFORMANCE OF RC BEAMS REINFORCED WITH FRP AND ECC MATERIALS

Evaluation of the bending performance of glued CLT-concrete composite floors based on the CFRP reinforcement ratio