Abstract:Coal gasification is widely used for chemical production as well as energy generation, and slag tapping process is crucial to entrained-flow coal gasification, before which particle deposition play an important role in slag formation. In order to investigate the slag tapping under special or abnormal operating conditions, the ash/slag particle deposition and ash/slag layer behavior characteristics have been studied based on a bench-scale impinging entrained-flow gasifier. High temperature endoscopy combined with high speed photography is applied to obtain images inside the gasifier and image processing techniques are used to distinguish the object from the high brightness background. The results show that an ash/slag deposition layer is formed under low operating temperature. In the case of particle deposition: High temperature particle (HTP) with medium size would slide on ash/slag layer after impacting, low temperature ash/slag on the deposition layer adheres on the particles and detach from the deposition layer together. HTPs with big size would attract low temperature ashes while travelling in gasifier space and ash/slag surface after impact, then form a low temperature particle (LTP) group with high temperature core and detach from the basic ash/slag layer. LTPs with big size and high space speed would impact and embed into the ash/slag deposition layer, then particle temperature rises while particle volume decreases. The embedded particles hardly detach from the basic layer. The low temperature ash/slag deposition layer would detach from the old slag layer on refractory wall, and the detachment of ash/slag layer is mainly classified into three typical patterns according to the behaviors of the detach process: detach after sliding pattern, detach after tilting and shaking pattern, detach after warping and fracturing pattern. Detachment after warping and fracturing is the commonest pattern of ash/slag deposits behavior that has been observed. Due to the huge volume of detached pieces, it could be the major source of slagging under abnormal operating condition: Under certain extreme conditions, slag tap hole would be blocked by the bridging of huge ash/slag deposits pieces and leads to overpressure of gasification chamber and slagging failure. In industrial applications, the results of this study would be the theoretical support for the suggested minimum load and suggested feeding period of the gasifier during the unique online pressurized continuous coal-water slurry feeding technique of the opposed multi-burner (OMB) gasification.

Determining Criterion of the Operating Temperature in the Refractory Brick Entrained-Flow Gasifier Based on the Coal Viscosity Characteristics and Slag Flow Process

The Study of Slag Discharge Behavior of Entrained-Flow Gasifier Based on the Viscosity-Temperature Characteristics of Different Types of Coals

The Effect of Coal Viscosity-Temperature Characteristics on the Dynamic Response of Slag Discharge Behavior in Shell Gasifier

Acoustic Emission Detection of Slag Performance in Coal Gasifiers

Investigation of fluctuation behavior in viscosity of coal slags used in entrained-flow gasifiers

Molten Slag Flow and Phase Transformation Behaviors in a Slagging Entrained-Flow Coal Gasifier

Modeling Study of Residence Time of Molten Slag on the Wall in an Entrained Flow Gasifier

Modeling of Multiphase Reaction and Slag Flow in Single-Burner Coal Water Slurry Gasifier

Transition Temperature and Thermal Conduction Behavior of Slag in Gasification Process

Modelling study of characteristics of heat transfer and structural optimization of refractory layer in an entrained-flow gasifier

Investigation on Ash Fusion and Slagging Properties of Coal under Reducing Atmosphere

An investigation on the heat transfer behavior and slag deposition of membrane wall in pilot-scale entrained-flow gasifier

Flow properties and rheology of slag from coal gasification

Numerical Study of Dynamic Response Analysis of Slag Behaviors in an Entrained Flow Gasifier

The Study of the Effect of Gas-Phase Fluctuation on Slag Flow and Refractory Brick Corrosion in the Slag Tapping Hole of an Entrained-Flow Gasifier

The Study on Rheological Properties of Slag and Heat Transfer Process of Membrane Wall

Numerical Simulations Of Solidification Characteristics Of Molten Slag Droplets In Radiant Syngas Coolers For Entrained-Flow Coal Gasification

A Deep Insight on the Correlation Between Slag Viscosity Fluctuation and Decomposition of Sulfur-Bearing Minerals in the Entrained Flow Gasifier

The Effect of the Shear Force Applied by Gas-Flow in Furnace on Slag Flow Characteristics and Gasifier Performance

Vision-based Investigation on the Ash/slag Particle Deposition Characteristics in an Impinging Entrained-Flow Gasifier

Modelling of Slag Flow and Prediction of Corrosion State of Refractory Bricks in an Entrained-Flow Gasifier