Abstract:This paper aims to investigate the cyclic performance of the connections between the recycled aggregate concrete (RAC) column and steel H-beam. In this connection system, the steel beam is welded to the end plate as an integral unit and bolted to the column. The seismic performance differences between the novel casing-type one-side bolted end-plate connection and the conventional all-welded joint with external diaphragm and top-seat angle connection were examined. Subsequently, three types of joints with different connection details were designed and fabricated at a reduced scale of 1:2, following the principle of strong columns and weak beams. Through beam-end loading, the low-cyclic lateral loading test was performed to observe the loading process and failure morphology of the joint model. The load-beam end displacement hysteresis curve and the skeleton curve were obtained to analyze the joint load eigenvalues, ductility, energy dissipation, and stiffness degradation. The experimental results showed that the initial stiffness and peak strength of the casing-type one-side bolted end-plate connection were between that of the all-welded joint with external diaphragm and top-seat angle connection. All three specimens exhibited beam-end failure, with saturated load–displacement hysteresis curves. The displacement ductility coefficients were in the range of 2.66–2.88, and the ultimate elastic–plastic drift ratio was about 5.9–6.2%. Furthermore, a finite element model was established. The effects of axial compression ratio ( n = 0.2–0.8), steel tube width-to-thickness ratio ( B / t s = 35.7–83.3), outer tube ( t w = 3–7 mm), and end-plate thickness ( t d = 10–20 mm) on the bearing performance of the outer tube one-side bolted end-plate joint under lateral loading were analyzed. It was demonstrated that the load-carrying capacity of the specimen was significantly affected by the thickness of the outer tube and end-plate thickness, while the effect of the variation of the axial load level was small.

HSS Steel Corner Column to H-beam Joints under Cyclic Bidirectional Loadings: Experiment, Numerical Modeling, and Calculation

Load-Carrying Capacity and Practical Calculation Method for Hollow Cylinder Joints Connected with H-Shaped Beams

Experimental Study on Reduced I-beam to CFRST Column Joints under Cyclic Loading

EXPERIMENTAL STUDY ON THE SEISMIC BEHAVIOR OF CFST RECTANGULAR COLUMN TO H-SECTION STEEL BEAM CONNECTIONS WITH EXTERNAL STIFFENERS

Experimental and Numerical Study on Cyclic Behaviour of Steel Beam-to-column Joints

Finite Element Simulations of Unequal-Depth Panel Zones in Steel Beam-to-tubular Column Joints

Shear Behavior of Panel Zones in Steel Beam-to-Column Connections with Unequal Depth of Outer Annular Stiffener

Research on shear strength of CFSST column and H-section with beam composite joint of unequal depth

Numerical investigation and design for the local buckling behaviour of high strength steel hexagonal hollow section stub columns under axial compression

Concrete-filled Thin-Walled Steel SHS and RHS Beam-Columns Subjected to Cyclic Loading

FEM Analysis on Cyclic Behavior of Improved Beam-Column Connections in Steel Frames

Axial compression behaviour of welded high-strength H-columns experimental tests and numerical simulations

Inclined Concrete-Filled SHS Steel Column to Steel Beam Joints under Monotonic and Cyclic Loading: Experiments

Performance of Concrete-Encased CFST Column-to-beam 3-D Joints under Seismic Loading: Analysis

Finite Element Analysis on Behavior of Reinforced Hollow High Strength Concrete Filled Square Steel Tube Short Columns under Axial Compression

Behavior of Hexagonal Concrete-Filled Steel Corner Columns under Eccentric Compression

Cross-section behaviour of cold-formed high strength steel irregular hexagonal hollow section stub columns under combined compression and bending

Experimental and numerical investigation of H-beam to recycled aggregate concrete column edge connections under cyclic loading

Numerical Evaluation on Shear Behavior of Irregular Steel Beam-to-cfst Column Connections

Progressive collapse mechanism for H-beam-concrete-filled steel tubular column connections with steel inner-diaphragm joints

Behaviour Of Reinforced Joints Between Steel Beam And L-Shaped Wide Limb Composite Column