Abstract:This paper aims to investigate the cyclic performance of the connections between the recycled aggregate concrete (RAC) column and steel H-beam. In this connection system, the steel beam is welded to the end plate as an integral unit and bolted to the column. The seismic performance differences between the novel casing-type one-side bolted end-plate connection and the conventional all-welded joint with external diaphragm and top-seat angle connection were examined. Subsequently, three types of joints with different connection details were designed and fabricated at a reduced scale of 1:2, following the principle of strong columns and weak beams. Through beam-end loading, the low-cyclic lateral loading test was performed to observe the loading process and failure morphology of the joint model. The load-beam end displacement hysteresis curve and the skeleton curve were obtained to analyze the joint load eigenvalues, ductility, energy dissipation, and stiffness degradation. The experimental results showed that the initial stiffness and peak strength of the casing-type one-side bolted end-plate connection were between that of the all-welded joint with external diaphragm and top-seat angle connection. All three specimens exhibited beam-end failure, with saturated load–displacement hysteresis curves. The displacement ductility coefficients were in the range of 2.66–2.88, and the ultimate elastic–plastic drift ratio was about 5.9–6.2%. Furthermore, a finite element model was established. The effects of axial compression ratio ( n = 0.2–0.8), steel tube width-to-thickness ratio ( B / t s = 35.7–83.3), outer tube ( t w = 3–7 mm), and end-plate thickness ( t d = 10–20 mm) on the bearing performance of the outer tube one-side bolted end-plate joint under lateral loading were analyzed. It was demonstrated that the load-carrying capacity of the specimen was significantly affected by the thickness of the outer tube and end-plate thickness, while the effect of the variation of the axial load level was small.

Experimental and numerical investigation of H-beam to recycled aggregate concrete column edge connections under cyclic loading

Experimental Study on Reduced I-beam to CFRST Column Joints under Cyclic Loading

Experimental Research on Seismic Behavior of Reinforced Concrete Column-to-Steel Beam Joints with Bolted End-plate

Experimental Evaluation of Steel Beam Bolted to Reinforced Concrete Column Connections

EXPERIMENTAL STUDY ON THE SEISMIC BEHAVIOR OF CFST RECTANGULAR COLUMN TO H-SECTION STEEL BEAM CONNECTIONS WITH EXTERNAL STIFFENERS

Experimental Research on End-plate Bolted Connection with Steel Beam and Reinforced Concrete Column

Seismic Behavior of Exterior Connections with Steel Beams Bolted to Cft Columns

Experimental Study on Edge Cell Partially-Replaced Joint for I-beam to Multi-Celled CFST Walls under Cyclic Loading

Seismic Behavior of an Improved Drilled Flange Connection for I-beam to CFST Column

Experimental Research on Seismic Performance of a New-Type of R/C Beam-Column Joints with End Plates

Experimental study of a new beam-to-column connection for precast concrete frames under reversal cyclic loading

Experimental investigation on joints between steel-reinforced concrete T-shaped column and reinforced concrete beam under bidirectional low-cyclic reversed loading

Seismic behaviour of Concrete-filled steel tubular column to H-Shape steel beam connection with side plate

Experimental and numerical investigation of the hysteretic behavior of reinforced concrete column-steel beam interior joints under low seismic intensity levels

Behaviour of Bolted End-Plate Connections to Concrete-Filled Steel Columns

Experimental study on demountable and reusable steel beam-to-column joints with bolted-pinned connections

Experimental and Numerical Analyses on the Seismic Performance of a Novel Precast Concrete Column-column Joints with Bolted End-plate Connection

Seismic behavior of steel-reinforced recycled concrete inner-beam–column connection under low cyclic loads

Hysteretic behavior of CFST column-steel beam bolted joints with external reinforcing diaphragm

Experimental and numerical investigation on the column-beam connection in the corrugated steel plate-concrete composite frame

Seismic behavior of RCS frame joints applied with high-strength bolts-end plate connection