Abstract:The flashover of polluted insulators is a serious threat to the safe operation of overhead power lines. The leakage current on surface of insulators is closely related to the developing process of pollution flashover, affected by many factors, such as wetting degree, system voltage and structures of insulators. At the same time, the leakage current is easy to be monitored on-line continuously. Hence, as one of on-line monitoring methods for polluted insulators. Based on artificial pollution tests under different relative humidity (RH) and salt deposit density (SDD), a method incorporates S-transform and support vector machine (SVM) for evaluating safety condition of polluted insulators is proposed. Firstly, the approach utilizes S-transform to extract the amplitude Ih, phase θ and total harmonic distortion (THD) of leakage current. Then the I h , θ and THD are as characteristic parameters to put into SVM, the output parameters of SVM are fuzzifled into four fuzzy subsets for evaluating safety condition of polluted insulators. Lastly, the performance of SVM is validated by 8 pairs of testing samples, and the influences of SDD and RH on the performance of insulators are discussed. The results show that, the leakage current becomes inductive when strong local arcs occur, decreases with the increase of RH, and Ih has no relation with SDD when the RH is low but increases with the increase of SDD when RH is high. THD of leakage current increases slowly with the increase of RH when the pollution is light, but decreases firstly and then increases with the increase of RH when the pollution is middle or heavy, THD take the minimum at the RH of about 80%.

Experimental Study on the Effect of Surface Contamination on the Function of Thyristor Voltage Monitoring Board

Effect of Contamination and Relative Humidity on the Function of Thyristor Voltage Monitoring Board

Failure Analysis of the Converter Valve in Gao-Zhao HVDC Project

The Effect of Thermal and Moisture Stress on Insulation Deterioration Law of Ionic Contaminated High-Voltage Printed Circuit Board of Electronic Power Conditioner

Comparative Study of Reliability Degradation Behaviors of LDMOS and LDMOS-SCR ESD Protection Devices

Online monitoring and correction method of threshold voltage in SiC MOSFET power cycling test

Contamination Failure Mechanism and Test of Miniature Mechanical Cryocooler

A Low-Cost Evaluation and Correction Method for the Soluble Salt Components of the Insulator Contamination Layer

Effects of Natural Contamination Components on the Surface Conductivity under Saturated Moisture

Assessment of Insulator Pollution Degree Based on Contamination Moisture With Temperature Change

Applying S-Transform and SVM to Evaluate Insulator's Pollution Condition Based on Leakage Current

Influence of Partial Electric Arc on the Contamination Degree Monitoring System in View of Leakage Current

Insulator Contamination Monitoring Based on Its Hygroscopicity Under Unsaturated Humidity

Experimental Study on the Contamination Deposition Characteristics of Insulators in a Fog–haze Environment

Dynamic Moisture of Energized Insulator Contamination Layers with Humidity Variation

Study on the Algae Contamination and Its Effects on the Properties of RTV-Coated Insulators

Analysis of the Contamination of Insulators Using the Partial Surface Conductivity Method

Failure Analysis of the Contamination on the Pins of the SOT Packages

Study on Method and Device Used for Evaluating the Contamination Condition on the Surface of Composite Insulator

Contamination Prediction on Insulators Considering of Meteorology,Geomentric Parameters and Air Pollutant

Influence of Temperature Difference on Wetting Characteristics of Insulators