Failure Mechanism and Parameter Analysis of Outer Sleeve Joints under Reciprocating Load

Dan Zhang,Lei Zhang

2021-01-01

Abstract:The beam-column joint is an important force transferring hub in a frame system whose seismic performance directly affects the overall response of the structure. To reveal the force transmission path and explore the seismic performance of joints, a numerical analysis method for a new outer sleeve joint of a square steel tubular column-H-shaped steel beam was proposed in this study. The failure modes and mechanical properties of four outer sleeve joints under reciprocating load were analyzed using the finite element software ABAQUS. On the basis of the stress distribution characteristics of components, the failure mechanism of each component of the joints was revealed, and the shear force transfer path in the joint core area was obtained. In addition, a parameter analysis was carried out from the three aspects of material parameters, geometric parameters, and load parameters, and the factors affecting the seismic performance of the joints were discussed. Results show that the failure of the plastic hinge at the beam end satisfies the design requirements of strong joint and weak member and that the geometric dimension is the key factor affecting the failure mode and seismic performance indicators of joints. The stiffener ribs bear 26.2% to 59.2% of the shear force during the shear force transfer process in the joint core area. As the distance from the joint core area decreases, the shear force assumed by the beam web is reduced. The linear stiffness ratio and the flexural capacity ratio of the beam-to-column are identified as the major parameters affecting the failure mode of outer sleeve joints, and their recommended values are 0.536 and 0.372, respectively, combined with the seismic performance of joints. This study provides an important foundation for determining the reasonable values of outer sleeve joints in steel frame design.