Abstract:Addressing issues such as the mass transfer characteristics and internal performance consistency of the air cooling (AC) proton exchange membrane fuel cell (PEMFC) stack. A full-scale AC metal bipolar plate (BP) stack is proposed in this study, comprising inlet and outlet manifolds, membrane electrode assembly (MEA), reaction flow field (FF) and cooling FF. The coupling of electrochemical reactions and heat and mass transfer processes in the stack is simulated using a non-isothermal multiphase numerical model. The characterization of the mass spatial distribution in the stack is explored by varying the stoichiometric ratio of the cathode gas, the thermal boundary conditions, the flow direction of the reaction gas and the air inlet flow configuration . According to the simulation results, it is found that, initially, the simulation errors in the one-dimensional (1D) AC stack are large and mainly concentrated in the concentration loss region. Subsequently, the increased stoichiometric ratio enhances the proton exchange membrane (PEM) water content, improves the local current density by 1.6% and facilitates the discharge of waste heat from the stack. Furthermore, thermal boundary conditions significantly affect the distribution of temperature uniformity in the stack, with high local temperatures causing significant water vapor generation and resulting in oxygen dilution. The counter-flow of hydrogen and air enhances the electrochemical reaction rates in the cathode catalyst layer (CCL) by 0.353%, with the lowest liquid water content in the seventh cell, influenced by the uneven distribution of manifold flow. Finally, changing the position of the cathode manifold gas inlet indicates that the positive flow of the cathode and AC inlets from the Z axis reduces the maximum stack temperature and water vapor by 1.04% and 0.38% respectively. The CCLs in Case 4 have optimal oxygen distribution and output voltages of approximately 0.66 V per fuel cell (FC).

Preliminary Experimental Study of the Performances for a Print Circuit Board Based Planar PEMFC Stack

Development of Integrated Packaged Single Fuel Cell Short Stack Based on Titanium Metal Plates for Mobile Power Generation

Study on the Output Performance of the Proton Exchange Membrane Fuel Cells Using Print Circuit Board

A Novel Design of Wave‐Like PEMFC Stack with Undulate MEAs and Perforated Bipolar Plates

Numerical Study on Effect of Flow Field Configuration on Air-Breathing Proton Exchange Membrane Fuel Stacks

Performance Improvement of Wave‐Like PEMFC Stack with Compound Membrane Electrode Assembly

Development of Novel Single Fuel Cell Based on Composite Polar Plates for Highly Efficient Power Generation

Performance simulation and key parameters in-plane distribution analysis of a commercial-size PEMFC

Design and fabrication of composite current collector used in 2-cell stacks for portable power generator

Characteristics of heat, power generation, and energy efficiency study on a novel air-cooled PEMFC stack based on micro heat pipe arrays

Design and Numerical Analysis of Air-Cooled Proton Exchange Membrane Fuel Cell Stack for Performance Optimization

Proton Exchange Membrane Fuel Cell(pemfc) Stack for Vehicles

Full-scale three-dimensional simulation of air cooling metal bipolar plate proton exchange membrane fuel cell stack considering a non-isothermal multiphase model

Improved flow field design for air-cooled proton exchange membrane fuel cells

Development of a kilowatt class PEMFC stack using Au-coated LF11 Al alloy bipolar plates

Experimental study on the thermal management of an open-cathode air-cooled proton exchange membrane fuel cell stack with ultra-thin metal bipolar plates

Performance of a Proton Exchange Membrane Fuel Cell Stack Using Conductive Amorphous Carbon-Coated 304 Stainless Steel Bipolar Plates

Experimental and Numerical Investigation on Effects of Cathode Flow Field Configurations in an Air-Breathing High-Temperature PEMFC

An Electrochemical Performance Model Considering of Non-Uniform Gas Distribution Based on Porous Media Method in PEMFC Stack

A Paper‐based Self‐pumping Microfluidic Fuel Cell Stack with a Novel Vertical Structure

Study on performance of membrane electrode assembly with domestic materials for PEMFC