Abstract:To reduce carbon emissions associated with substantial concrete usage in construction and achieve the objectives of green and low-carbon construction, this study innovatively develops a low-carbon binary material by adding limestone powder (LP) and silica fume (SF) into the conventional cement-based material, enhancing the comprehensive utility value of LP. The experimental results show that the addition of 15% LP and 5% SF increases the yield stress of the mortar yet substantially reduces the plastic viscosity to 2.84 Nmm·min, representing a 44.5% decrease compared to pure cement slurry. This reduction is conducive to long-distance pumping of the cement-based material. Moreover, the addition of 5% SF compensates for the 18.8% (mid-stage, 28-d) and 15.8% (late-stage, 90-d) strength loss in mortar caused by LP while simultaneously improving the strength of the co-mixed system by 10.4% (mid-stage) and 10.8% (late-stage). In the early-stage measurements of the LP-SF binary cement-based materials, it is observed that while SF slightly increases the hydration heat release, LP suppresses the early hydration heat release. Therefore, the total heat release observed in the 15% LP and 5% SF group after 72 h is only 254 J/g, demonstrating favorable temperature control and crack prevention effects. In addition, X-ray diffraction (XRD) and thermogravimetric/differential thermogravimetric (TG/DTG) phase analysis reveal a notable increase of 53.56% in CH consumption. Besides, the weight loss on ignition of C-S-H crystals increases, indicating that the secondary hydration of LP and the pozzolanic reaction of SF promote the production of C-S-H in the system. Combined with the late-stage strength and water absorption characteristics, it is concluded that the system exhibits good mechanical properties and compactness. This study presents a use of mixed proportion that enables excellent mechanical properties, good pumping performance, and low hydration heat. Moreover, the analysis indicates that the carbon emission of each cubic meter of the as-developed mortar is reduced by approximately 16.7–23.9%, promoting the efficient and clean utilization of LP and SF.

A Quantitative Study on the Synergistic Effect Between Limestone Powder and Supplementary Cementitious Materials

The Synergy Effect of Limestone Powder and Mineral Admixtures on the Mechanical Property of Mortar

The Synergistic Effect of Limestone Powder and Rice Husk Ash on the Mechanical Properties of Cement-Based Materials

Effect of Limestone Powder on Microstructure of Ternary Cementitious System

Recycling Sewage Sludge Ash and Limestone for Sustainable Cementitious Material Production

Examining the early-stage performance and mechanical performance of limestone powder-silica fume binary cement-based materials

A Quantitative Study on Physical and Chemical Effects of Limestone Powder on Properties of Cement Pastes

Effect of High Content Limestone Powder on Microstructure and Mechanical Properties of Cement-based Materials

The Synergistic Effect of Calcained Coal-Series Kaolinite and Limestone on the Hydration of Portland Cement

Role of Limestone Powder and Its Effect on Durability of Cement-Based Materials

Synergistic Effect of Red Mud, Desulfurized Gypsum and Fly Ash in Cementitious Materials: Mechanical Performances and Microstructure

Investigation of Synergistic Effects of Lithium Slag and Granulated Blast Furnace Slag from the Perspectives of Physics and Hydration

Effects of C-S-Hs-PCE and Na2SO4 on Hydration Behavior of Cement-Lithium Slag Binder

Study on the Synergistic Effect of Calcium Carbide Residue -Fly Ash Enhanced Desulphurisation Gypsum under High Temperature Maintenance Condition

Improving the Performance of Ultra-High Performance Concrete Containing Lithium Slag by Incorporating Limestone Powder

In-depth insight into the cementitious synergistic effect of steel slag and red mud on the properties of composite cementitious materials

The Synergistic Effects of Ultrafine Slag Powder and Limestone on the Rheology Behavior, Microstructure, and Fractal Features of Ultra-High Performance Concrete (UHPC)

Multivariate mixed effect of limestone powder-fly ash-slag powder on the performance of concrete

Fabrication of Energy-Efficient Carbonate-Based Cementitious Material Using Sodium Meta-Aluminate Activated Limestone Powder

Hydration and Microstructure of Ternary High-Ferrite Portland Cement Blends Incorporating a Large Amount of Fly Ash and Limestone Powder

Synergistic Effects and Mechanisms of Composite Supplementary Cementitious Materials with Carbon-Fixing Steel Slag Powder and Aluminum-Containing Mineral Admixtures