Abstract:This article presents a broadband substrate integrated coaxial line (SICL) radial power divider with high output isolation. The proposed power divider mainly consists of input impedance matching circuits, microstrip isolation circuits, and radial SICL circuits. The two-layer substrate of the input impedance matching circuit acts as a quasi-coaxial structure and is connected to the coaxial input port to provide the function of impedance matching. The star-type microstrip isolation circuits are employed to enhance the isolation performance between the output ports of the power divider. Two designed substrates sandwiching the air cavity layer constitute the radial SICL circuit, and the input microwave signal is evenly divided into 8 channels of signals with the same power. The designed power divider using SICL technology has the characteristics of supporting transverse electromagnetic mode transmission, being broadband, and compatible with substrate integration. A prototype of the multi-layers eight-way SICL power divider is designed, fabricated, and measured. The measured results show that the relative bandwidth of 15 dB input/output return loss is 34% and 43%, respectively. The absolute bandwidth of 15 dB input/output return loss is 5-7 GHz and 4.5-7.1 GHz, respectively, and the isolation between output ports is greater than 20 dB in the above frequency bands.

Low‐insertion‐loss Planar Four‐way Gysel Power Divider with High Isolation Employing Two‐layer Substrates

Multilayer Four-Way Power Divider with Improved Isolation Performance

Compact Quasi-Planar Four-Way Power Divider with Wide Isolation Bandwidth

Compact Four-Way Suspended-Stripline Power Divider With Low Loss And High Isolation

Compact High-Isolation Planar Eight-Way Power Divider Using Zero-Phase Isolation Circuit

Planar Four-Way Power Divider with Stopband Rejection and Good Output Isolation

Four-way Hybrid SIW/microstrip-line Power Divider with Improved Output Isolation

Hybrid Microstrip/siw Power Divider with Improved Output Isolation

Microstrip/Slotline-Coupling Substrate Integrated Waveguide Power Divider with High Output Isolation

Ka-Band Rectangular-Waveguide Gysel Power Divider with Low Insertion Loss and High Output Isolation

Novel Subterahertz High Isolation Stacked-SIW Power Divider

Compact coaxial-waveguide four-way power divider with low insertion loss and high output isolation

Eight-Way Substrate Integrated Waveguide Power Divider with Low Insertion Loss

Novel Four-Way Multilayer SIW Power Divider with Slot Coupling Structure

Compact Power Divider with Improved Isolation and Bandpass Response

A BROADBAND OUT-OF-PHASE POWER DIVIDER FOR HIGH POWER APPLICATIONS USING THROUGH GROUND VIA (TGV)

Planar Ultra-Wideband Eight Way Power Divider with Improved Isolation Bandwidth

Compact Multi-Layer N-way Power Divider with Closed-Ring-shaped Isolation Network

Broadband Eight‐way Substrate Integrated Coaxial Line Power Divider with High Isolation

Wideband Out-Of-Phase Power Dividers With Improved Isolation Performance

Quasi-planar High-Isolation Four-Way Power Divider Based on Capacitance Compensation Technology