Abstract:In this paper, a multidisciplinary optimization design method and its verification of low-noise aircraft propellers considering aerodynamics, noise, and structural strength were carried out to further reduce the aerodynamic noise of the aircraft propellers. The Vortex Lattice Method-based Lift Surface Method and the Frequency-Domain-based Hanson Method were deployed to evaluate the aerodynamic performance and far-field noise of the propeller with validation by benchmark test result comparison, respectively. Integrating both of the aforementioned methods, the constraints, and a genetic algorithm with coding, a joint program was successfully proposed so that the aircraft propeller performance could be optimized comprehensively. In this program, the design variables contain blade structural strength-constrained distribution patterns of the chord length, twist angle, and dihedral angle along the blade radius. A maximum amount of noise reduction was settled as an optimization target. Meanwhile, it ensured no penalty for aerodynamic thrust and efficiency. The optimized propeller was successfully delivered by performing the developed program. Its structure examined strength tests such as static load and dynamic response, and its aerodynamic and aeroacoustic performances were tested at an aeroacoustic wind tunnel. As a result, the optimized propeller reduced its far-field noise emission peak by 2.7 dB at the first BPF under typical conditions and performed a maximum noise reduction of 4 dB for lower-thrust operations compared with the baseline propeller. For the latter operation, noise reduction at the second BPF was also obviously observed.

A New Design Method for Ship Propellers with Prescribed Circulation Distributions Based on the Vortex Lattice Lifting-Surface Model

DESIGN OF OPEN-WATER AND WAKE-ADAPTED OPTIMUM PROPELLERS BASED ON A VORTEX LATTICE LIFTING-SURFACE MODEL

Design of Marine Propellers with Prescribed and Optimal Spanwise Circulation Distributions Based on Genetic Algorithms and Neural Network

Lifting Surface Optimization of Wake-Adapted Propeller by Surrogate Model

Design of Wake-Adapted Contra-Rotating Propellers for High-Speed Underwater Vehicles

Numerical study of the hydrodynamic performances of surface piercing propeller

Camber lines design approach of propeller blade sections based on the vortex lattice method

Improvement to a Design Method for Highly Skewed Contra-Rotating Propellers of Underwater Vehicles

Research on Optimized Design of the Pitch and Camber of Marine Propellers

Hybrid Aerodynamic Optimization of a Propeller Based on the Reformulated Blade Element Momentum Theory

A Vortex-Lattice Modeling Approach for Free-Surface Effects on Submerged Bodies and Propellers

A Design Method of Ducted Propeller by Coupled Lifting Surface Theory/Panel Method

Hydroelastic optimisation of a composite marine propeller in a non-uniform wake

Numerical Prediction of Propulsive Performance with an Iterative Body-Force Propeller Model

A Numerical Method for the Design of Ships with Wind-Assisted Propulsion

Numerical study on a coupled viscous and potential flow design method of axial-flow pump impeller

An Improved Spectral Method and Experimental Tests for the Low-Frequency Broadband Noise of Marine Propellers

Numerical simulation of KVLCC2 self-propulsion with ducted propeller in head waves

Hydrodynamic Design of an Advanced Submerged Propulsion

Multidisciplinary Optimization Design of Low-Noise Propellers

Numerical and Experimental Analysis of A Ducted Propeller Designed by A Fully Automated Optimization Process under Open Water Condition