Abstract:Prediction and optimisation of non-cavitating marine propeller noise at low frequency are important for design of submarine propellers that are required to operate in the non-cavitating condition. The low-frequency discrete- and broadband-spectrum forces of propellers have different generation mechanisms, and thus have not previously been studied within a unified framework. In this work, the strip method is applied to simultaneously predict and optimise these two forces. First, the panel method is applied to predict the discrete-spectrum forces of different strips in the time domain. Then, the unsteady force of the whole propeller is obtained as the linear superposition of the shifted unsteady forces of all the strips, according to a skew distribution. The strip method is then used to numerically solve an integral equation for the broadband-spectrum force, derived via the spectral method. On the basis of experimental results, the predictions of low-frequency discrete- and broadband-spectrum forces are verified to have high accuracies. An analysis of the effect of propeller skew on the unsteady forces of different strips, and the effect of strip-cutting strategy on the broadband-spectrum force, is also performed. It is found that the skew of a strip is approximately equal to the angle of the circumferential phase shift of the unsteady force of that strip, and that the strip-cutting method has an insignificant effect on the predicted broadband-spectrum force. The optimisation of propeller performance under several constraints is then considered, with the particular objectives of maximising the propulsion efficiency and minimising the low-frequency discrete- and broadband-spectrum forces. The circumferential phase-shift effect of the skew allows the optimisation model to be decoupled into two steps. The discrete-spectrum force of the whole propeller can thus be computed using linear superposition rather than a hydrodynamic calculation, which significantly improves the computational efficiency. The effectiveness of the optimisation is verified by two optimization cases. For HSP, the propulsion efficiency is increased by 2.5%, the broadband-spectrum noise is reduced by approximately 0.6 dB, and the first- and second-order values of discrete-spectrum thrust are decreased by 9% and 27%, respectively. Similarly, for E1619, the first- and second-order values of the discrete-spectrum thrust are reduced by 13% and 18%, respectively.

Design of Marine Propellers with Prescribed and Optimal Spanwise Circulation Distributions Based on Genetic Algorithms and Neural Network

Numerical Analysis and Validation of an Optimized B-Series Marine Propeller Based on NSGA-II Constrained by Cavitation

Hybrid Aerodynamic Optimization of a Propeller Based on the Reformulated Blade Element Momentum Theory

Flow Reconstructions and Aerodynamic Shape Optimization of Turbomachinery Blades by POD-based Hybrid Models

Multi-objective optimization design method of marine propeller based on fluid-structure interaction

Design Method for Low-Ice-Class Propellers Based on Multi-Objective Optimization

Energy‐Saving Optimization Design of Propeller Boss Cap Fin Based on BP Neural Network Coupled with Northern Goshawk Optimization Algorithm

Propeller optimization by interactive genetic algorithms and machine learning

Deep Learning Based Fast Prediction and Optimization of Aerodynamic Performance for a Propeller with Gurney Flap

Prediction and Optimisation of Low-Frequency Discrete- and Broadband-Spectrum Marine Propeller Forces

Numerical study of the hydrodynamic performances of surface piercing propeller

Multi-objective Optimization of a Low Specific Speed Centrifugal Pump Using an Evolutionary Algorithm

Optimal section design of surface piercing propeller using artificial neural networks algorithm

Smoothed Finite Element and Genetic Algorithm based optimization for Shape Adaptive Composite Marine Propellers

Optimal Design of Mixed-Flow Pump Impeller Based on Direct Inverse Problem Iteration and Genetic Algorithm

Optimization of thin electric propeller using physics-based surrogate model with space mapping

Multi-objective Optimization of a Mixed-Flow Pump Impeller Using Modified NSGA-II Algorithm

Multi-objective optimization of cycloidal blade-controlled propeller: An experimental approach

Multi-fidelity neural network-based aerodynamic optimization framework for propeller design in electric aircraft

Multidisciplinary Optimization Design of Low-Noise Propellers

Parameterized design method and verification of propeller single-passage domain