Abstract:Prediction and optimisation of non-cavitating marine propeller noise at low frequency are important for design of submarine propellers that are required to operate in the non-cavitating condition. The low-frequency discrete- and broadband-spectrum forces of propellers have different generation mechanisms, and thus have not previously been studied within a unified framework. In this work, the strip method is applied to simultaneously predict and optimise these two forces. First, the panel method is applied to predict the discrete-spectrum forces of different strips in the time domain. Then, the unsteady force of the whole propeller is obtained as the linear superposition of the shifted unsteady forces of all the strips, according to a skew distribution. The strip method is then used to numerically solve an integral equation for the broadband-spectrum force, derived via the spectral method. On the basis of experimental results, the predictions of low-frequency discrete- and broadband-spectrum forces are verified to have high accuracies. An analysis of the effect of propeller skew on the unsteady forces of different strips, and the effect of strip-cutting strategy on the broadband-spectrum force, is also performed. It is found that the skew of a strip is approximately equal to the angle of the circumferential phase shift of the unsteady force of that strip, and that the strip-cutting method has an insignificant effect on the predicted broadband-spectrum force. The optimisation of propeller performance under several constraints is then considered, with the particular objectives of maximising the propulsion efficiency and minimising the low-frequency discrete- and broadband-spectrum forces. The circumferential phase-shift effect of the skew allows the optimisation model to be decoupled into two steps. The discrete-spectrum force of the whole propeller can thus be computed using linear superposition rather than a hydrodynamic calculation, which significantly improves the computational efficiency. The effectiveness of the optimisation is verified by two optimization cases. For HSP, the propulsion efficiency is increased by 2.5%, the broadband-spectrum noise is reduced by approximately 0.6 dB, and the first- and second-order values of discrete-spectrum thrust are decreased by 9% and 27%, respectively. Similarly, for E1619, the first- and second-order values of the discrete-spectrum thrust are reduced by 13% and 18%, respectively.

Numerical Analysis and Validation of an Optimized B-Series Marine Propeller Based on NSGA-II Constrained by Cavitation

Numerical Prediction of Cavitation Fatigue Life and Hydrodynamic Performance of Marine Propellers

Hybrid Aerodynamic Optimization of a Propeller Based on the Reformulated Blade Element Momentum Theory

Design of Marine Propellers with Prescribed and Optimal Spanwise Circulation Distributions Based on Genetic Algorithms and Neural Network

Multi-objective optimization design method of marine propeller based on fluid-structure interaction

Numerical and Experimental Analysis of A Ducted Propeller Designed by A Fully Automated Optimization Process under Open Water Condition

Lifting Surface Optimization of Wake-Adapted Propeller by Surrogate Model

Design Method for Low-Ice-Class Propellers Based on Multi-Objective Optimization

Numerical study of the hydrodynamic performances of surface piercing propeller

Optimization procedures for a twin controllable pitch propeller of a ROPAX ship at minimum fuel consumption

Multi-objective optimization of cycloidal blade-controlled propeller: An experimental approach

Multi-objective Optimization of a Mixed-Flow Pump Impeller Using Modified NSGA-II Algorithm

Numerical Analysis on Propulsive Efficiency and Pre-Deformated Optimization of a Composite Marine Propeller

The Application of Particle Swarm Optimization Arithmetic in Propeller Design.

A numerical research on the hydrodynamic performance of marine propellers with bionic coupled blade sections

Propeller optimization by interactive genetic algorithms and machine learning

Research on Optimized Design of the Pitch and Camber of Marine Propellers

Resistance and Wake Distortion Optimization of JBC Considering Ship-Propeller Interaction

Energy‐Saving Optimization Design of Propeller Boss Cap Fin Based on BP Neural Network Coupled with Northern Goshawk Optimization Algorithm

Performance research and optimization of marine dual-fuel engine based on RSM and NSGA-II

Prediction and Optimisation of Low-Frequency Discrete- and Broadband-Spectrum Marine Propeller Forces