Abstract:Abstract Oil and gas pipeline failure and leakage can seriously damage people's lives and the ecosystem. The prediction of failure pressure for pipelines with damage is one of the most important and challenging tasks faced by industry, which affects the assessment of pipeline safety. Previous studies widely used industrial models or the finite element (FE) method to predict the failure pressure. However, the industrial models may give limited information, and the FE method has much heavy computation burden. In this work, three machine learning models - artificial neural network (ANN), XGBoost (XGB) and CatBoost (CAT) are developed for forecasting the failure pressure of pipelines with defects. Firstly, the simulation results of the FE method are validated by real failure pressure and compared with the calculation results of industrial models (ASME-B31G and DNV). Then 180 pipeline samples including pipeline attributes and defect sizes collected from real in-line inspection data in a pipeline company and the corresponding FE simulation results of failure pressure of these 180 defective pipelines are used for the training and testing of the machine learning models. The results show that the simulation accuracy of the FE method is higher than the calculation accuracy of the industrial models, and the FE simulation results are suitable to be the outputs of machine learning models. The three machine learning methods all provide satisfactory prediction accuracy in failure pressure. Specifically, CAT is the best machine learning method in this study for its lowest relative error (3.11% on average), mean absolute error (0.53), root mean square error (0.78) and highest coefficient of determination (R2) up to 98% in testing. Moreover, the machine learning models present better performance on average relative errors compared to the industrial models. CAT shows higher accuracy than the industrial models and FE simulation on minimum and average relative errors. Finally, the prediction result of CAT is used to discuss the effect of input features on failure pressure of pipelines, which demonstrates that the importance of features follows the order of pipeline thickness > pipeline outside diameter > defect depth > defect length > defect width. Once the above machine learning methods are used in industry, more and more real data will be collected to train a model and make it more accurate. In this way, these methods will provide an efficient way to evaluate the safety of defective pipelines. In addition, the failure pressure of pipeline could be estimated to help operators figure out a pipeline condition and further prioritize the pipelines for maintenance.

Deeppipe: Theory-guided neural network method for predicting burst pressure of corroded pipelines

Experimental and Numerical Analysis of the Impact of Corrosion on Pipeline Failure Pressure

A New Hybrid Approach Model for Predicting Burst Pressure of Corroded Pipelines of Gas and Oil

Theory and Machine Learning Modeling for Burst Pressure Estimation of Pipeline with Multipoint Corrosion

Effect of the Y/T on the Burst Pressure for Corroded Pipelines with High Strength

Integrity Assessment of the Pipelines Containing an Isolated Corrosion Pit

Deeppipe: Theory-guided prediction method based automatic machine learning for maximum pitting corrosion depth of oil and gas pipeline

Artificial Neural Network-Based Failure Pressure Prediction of API 5L X80 Pipeline with Circumferentially Aligned Interacting Corrosion Defects Subjected to Combined Loadings

Research on a model-based burst pressure prediction method for pipelines with corrosion defects

Model for the Failure Prediction Mechanism of In-Service Pipelines Based on IoT Technology

A study of neural network-based evaluation methods for pipelines with multiple corrosive regions

A Novel Model for Prediction of Burst Capacity of Corroded Pipelines Subjected to Combined Loads of Bending Moment and Axial Compression

The Failure Window Method and Its Application in Pipeline Burst

Numerical Simulation and ANN Prediction of Crack Problems within Corrosion Defects

Deeppipe: Theory-guided LSTM method for monitoring pressure after multi-product pipeline shutdown

An Efficient Corrosion Prediction Model Based on Genetic Feedback Propagation Neural Network

Prediction Model of Corrosion Rate for Oil and Gas Pipelines Based on Knowledge Graph and Neural Network

Burst Pressure Prediction of Subsea Supercritical CO2 Pipelines

Failure Pressure Prediction of High Toughness Pipeline with a Single Corrosion Defect Subjected to Combined Loadings Using Artificial Neural Network (ANN)

Failure Pressure Prediction of Defective Pipeline Using Finite Element Method and Machine Learning Models