Abstract:High-strength steel (HSS) and ultra-high performance concrete (UHPC) are materials that countries use to promote the development of green and energy-saving civil engineering construction. The objective of this study was to investigate the flexural performances of partially prefabricated and assembled HSS reinforced UHPC (PPHSRC) beams. To this end, six PPHSRC beams were produced and the static bending tests were conducted while considering the primary design parameters such as the thickness of the steel flange, the type of the steel section and the form of the laminate slab. Typical flexural failure mode and crack patterns were observed, and the flexural characteristics were evaluated based on the load–deflection behavior and ductility. The results showed that PPHSRC beams were well-composite and had good ductility. With the increase of the thickness of the steel flange, the ultimate bearing capacity of the PPHSRC beam increased remarkably, but the cracking bearing capacity was less affected. Compared with inverted T-steel, unequal flange I-steel was beneficial to the flexural capacity of the PPHSRC beam, though the effect was slight. The flexural capacities of PPHSRC beams with the keyways structure concrete laminated slab were much higher than those of PPHSRC beams with the reinforced trusses concrete laminated slab. Finally, a calculation method for flexural capacity based on the plastic theory was proposed. The calculation results were in good agreement with experimental results, confirming that the method can be applied to accurately predict the flexural capacity of the PPHSRC beam and provide a reference for further research.

Flexural Behavior of Light Steel Purlins Reinforced by Prestressed CFRP Laminates

EXPERIMENTAL STUDY ON FLEXURAL BEHAVIOR OF REINFORCED CONCRETE BEAMS PRE-STRESSED WITH CFRP TENDONS

Moment Resistance and Flexural Rigidity of Lapped Connections in Multi-Span Cold-Formed Z Purlin Systems

Behavior of Preloaded RC Beams Strengthened with CFRP Laminates

Flexural Performances of Pre-Stressed Concrete Piles Reinforced with Hybrid BFRP and Steel Bars

Effect of sustaining load level on flexural behavior of RC beams retrofitted with CFRP sheets

Flexural Behavior of Aluminum I-Beams Strengthened by Pre-Stressed Cfrp Tendons

Experimental study on flexural behavior of partially precast high-strength steel reinforced ultra-high performance concrete beam

Experimental and theoretical study on flexural behavior of steel-concrete composite beams strengthened by CFRP plates with unbonded retrofit systems

Study on flexural performance of cracked RC beams retrofitted with CFRP sheets

Numerical study of steel–concrete composite beams strengthened by CFRP plates with prestressed unbonded reinforcement system

Flexural performance investigation of steel-concrete composite beams strengthened with prestressed CFRP tendons in the negative bending moment region

Flexural Performance of RC Beams Strengthened with Polyester FRP Composites

Experimental study on the flexural performance of FRP grid-reinforced ultra-high-performance concrete I-beams with different steel fiber contents

Prestressed Glulam Beams Reinforced with CFRP Bars

Flexural capacity of concrete beams prestressed with carbon fiber reinforced polymer (CFRP) tendons

Ductility and Cracking Behavior of Prestressed Concrete Beams Strengthened with Prestressed CFRP Sheets

A PRACTICAL METHOD OF ULTIMATE FLEXURAL CAPACITY OF RC BEAMS STRENGTHENED WITH CFRP PLATES

Flexural performance of FRP-SWSSC-steel composite beams: Experimental and analytical investigation

Steel Columns Strengthened/reinforced by Prestressed CFRP Strips: Concepts and Behaviors under Axial Compressive Loads

The ways and mechanisms of using CFRP materials to strengthen the flexural performance of reinforced concrete beams