Abstract:Calcareous sand has been used as the main filling material in numerous reef constructions. Therefore, understanding its long-term dynamic engineering geological characteristics under cyclic applications of traffic or wave loading is crucial to the design and prediction of the serviceability of reef infrastructures. Considering this, seven monotonic triaxial tests and 33 high-cycle (25,000 cycles) drained triaxial tests were conducted on calcareous sand with various mean effective stresses (p') and cyclic stress ratios (ζ). The results show that the development of the accumulated axial strain (ε1acc) has a strong correlation with the positional relationship between the cyclic stress path and critical strength line (CSL) or static strength envelope (SSE) in the p'-q plane. The critical cyclic stress ratio ζc, that represents the cyclic stress path reaching the CSL, is proposed. When ζ>ζc, the growth rate of ε1acc with ζ increases drastically. Moreover, when the cyclic stress path approaches the SSE, ε1acc enters an incremental collapse state. The increase in p' diminishes the dilatancy of the volumetric strain εv. However, this response of εv reverses from decreasing to increasing with increasing ζ. The resilient modulus (Mr) increases with the number of cycles (N) due to the initial densification. If εv dilation occurs, Mr will decrease with N as particles lose contact. A single parameter for the cyclic stress path ratio (ψ) considering the effects of p', ζ, and SSE is proposed. Additionally, empirical formulas for calculating the ultimate ε1acc and Mr are established. Furthermore, particle degradation significantly worsens ε1acc and εv, but has a more profound effect on the compressibility of εv. This degradation is also detrimental to Mr. A certain deviation trend of the predicted values from the measured values is found to correspond with the relative particle breakage.

Shear Modulus and Damping Ratio of Saturated Coral Sand under Generalised Cyclic Loadings

Shear modulus and damping ratio of saturated coral sand under generalized cyclic loadings

Effects of Initial Static Shear on Cyclic Resistance and Pore Pressure Generation of Saturated Sand

Failure Mechanisms of Sand under Asymmetrical Cyclic Loading Conditions: Experimental Observation and Constitutive Modelling

Discrete-Element Simulation of Dense Sand under Uni- and Bidirectional Cyclic Simple Shear Considering Initial Static Shear Effect

Undrained Behavior of Sand under Cyclic Paths That Match Storm-Wave Loading Conditions

Advanced laboratory investigation of axial cyclic loading in silica sands

A New Index for Evaluating Liquefaction Resistance of Soil under Combined Cyclic Shear Stresses

Shear Modulus and Damping Ratio of Sand–Gravel Mixtures Over a Wide Strain Range

The monotonic and cyclic shear characteristics of saturated marine coral sand under various anisotropic features

Liquefaction Susceptibility of Saturated Coral Sand Subjected to Various Patterns of Principal Stress Rotation

Prediction model for generation trend of axial deformation of saturated coral sand under cyclic loading

Permanent Deformation Characteristics of Saturated Sand under Cyclic Loading

Long-term behaviour and degradation of calcareous sand under cyclic loading

Influence of Cyclic Loading History on Small Strain Shear Modulus of Saturated Clays

Experimental Study of Cyclic Shear Stiffness and Damping Ratio of Carbonate Sand-Steel Interface

Experimental research on reinforcement-soil interface stiffness and damping ratio under cyclic shearing

Experimental Research On Behaviors Of Saturated Loose Sand Subjected To Oblique Ellipse Stress Path

Cyclic Behavior of Saturated Soft Clay under Stress Path with Bidirectional Shear Stresses

Effect of Drained Static Shear on Cyclic Deformation Behavior of K-0-consolidated Sand

Experimental and Estimation Studies of Resilient Modulus of Marine Coral Sand under Cyclic Loading