Abstract:Roll-to-roll (R2R) slot-die coating of polymer electrolyte membrane fuel cell (PEMFC) catalyst layers represents a scalable deposition method for producing 10-20 m2·min-1 of catalyst-coated gas diffusion layers (GDLs). This high-throughput production technique will help lower the cost of PEMFC catalyst layers. The uniformity of the wet layer applied by slot die deposition is affected by process parameters such as substrate speed, vacuum pressure applied at the upstream meniscus, gap between the slot die lips and substrate, ink rheology, and other ink and substrate properties. The set of conditions for producing a defect-free coating with a dilute ink typically requires little to no upstream vacuum pressure, so suitable operating conditions can be found easily through trial and error and operator intuition. However, the higher viscosity of more concentrated inks dramatically shifts the range of settings that result in a homogeneous coating to higher vacuum levels, which are harder to find through hit or miss. A predictive model showing the range of operable conditions decreases material wastage inherent in experimentally searching for suitable parameters. In this study, the defect-free coating parameter window is explored experimentally and theoretically for two concentrations of PEFC cathode inks. Both a full capillary hydrodynamic model and a computationally cheaper viscocapillary model successfully predict the experimentally determined coating window within the experimental and model uncertainty limits for inks with 5.3 wt% and 12.0 wt% solids ink while maintaining the 0.1 mgPt·cm-2Pt areal loading target. This paper demonstrates a viable pathway for meeting the $30/kWnet ultimate cost target of the United States Department of Energy (U.S. DOE) Hydrogen Fuel Cells Technologies Office (HFTO). The concentrated ink lowers the thermal energy and capital expenditure (CapEx) budget of the coating process by decreasing the amount of time, energy, and floorspace required for drying the coating.

Slot Die Coating Window for a Uniform Fuel Cell Ink Dispersion

Study on micro-porous layer by coating on carbon fiber paper as gas diffusion layer

Ink Fluidic Behaviors during R2R Slot Die Coating on Quality Thin Film Formation

Slot-die-coating operability windows for polymer electrolyte membrane fuel cell cathode catalyst layers

Improved Coating Window for Slot Coating

Experimental and in silico simulation of slot-die coating with a polymer electrolyte fuel cell catalyst slurry

Numerical study of slot-die coating on film formation for different die lip configurations

Slot-die processing of lithium-ion battery electrodes—Coating window characterization

Microfluidic fuel cells integrating slanted groove micro-mixers to terminate growth of depletion boundary layer thickness

Numerical and experimental study on coating uniformity control in simultaneous double-sided slot coating with a novel contacted slot die

Bubble Defect Generation Mechanism in Slot Die Coating of High-Viscosity Fluids

Analytical determination of process windows for bilayer slot die coating

The effect of inorganic particles on slot die coating of poly(vinyl alcohol) solutions

Numerical Simulation on Preparing Uniform and Stable Perovskite Wet Film in Slot-Die Coating Process

Experimental and numerical study on flow characteristics of dual‐cavity die based on multi‐objective optimization

Numerical and experimental investigation on the defect formation in lithium-ion-battery electrode-slot coating

Droplet and Percolation Network Interactions in a Fuel Cell Gas Diffusion Layer

Experimental and Simulation Analysis of Liquid Capillary Fingering Process in the Gas Diffusion Layer

Surface enrichment of ionomer in fuel cell catalyst layer prepared using slot-die coating method

Recent progress of catalyst ink for roll-to-roll manufacturing paired with slot die coating for proton exchange membrane fuel cells

Pattern formation in slot-die coating