Abstract:In the Li-ion battery manufacturing process, uniform coating thickness is essential for ensuring high-quality electrode production. Elevated or scalloped coating edges are often formed because of inadequate coater design. Traditional coater design approaches entail resource-intensive coating experiments or time-consuming simulations. In this study, we present a five-step optimization framework to achieve uniform coating thickness in the cross-web direction. First, we conducted computational fluid dynamics (CFD) simulations by using a preselected set of 13 variables related to coater design and rheological properties of the slurry. Non-uniform coating characteristics were captured as dimensionless features derived from the CFD data. Then, we constructed a surrogate model to accurately replicate the CFD simulation and evaluate the dimensionless features. The surrogate model exhibited a high level of consistency with the original CFD data. The importance of the design variables was assessed in terms of accumulated local effects and Shapley values. On the basis of this assessment, six design variables related to coater geometry were selected to determine the optimal coater design given the coater width and slurry properties. Finally, genetic algorithms were employed to minimize the dimensionless features associated with defective coating edges. Statistically, the solutions reduced the number of dimensionless edge features by more than 90%. A comparison between the velocity profile data obtained by CFD and the surrogate model for the optimized solutions demonstrated the successful elimination of super-elevated edges in the coating. The proposed framework offers an effective optimization strategy that can be applied to practical coater design to minimize the occurrence of edge defects in the battery manufacturing industry.

Experimental and numerical study on flow characteristics of dual‐cavity die based on multi‐objective optimization

Study on Simulation of Stamping Forming and Die Surface Optimization of Aluminum Alloy Plate

Die Structure Optimization of Aluminum Alloy Wheel Low-Pressure Die Casting Based on CAE

Numerical study of slot-die coating on film formation for different die lip configurations

Multi-Objective Optimization of a Multi-Cavity, Significant Wall Thickness Difference Extrusion Profile Mold Design for New Energy Vehicles

CFD model of slot die coating for lithium-ion battery electrodes in 2D and 3D with load balanced dynamic mesh refinement enabled with a local-slip boundary condition in OpenFOAM

Numerical and experimental study on coating uniformity control in simultaneous double-sided slot coating with a novel contacted slot die

Numerical and experimental investigation on the defect formation in lithium-ion-battery electrode-slot coating

Multi-objective Numerical Simulation of Geometrical Characteristics of Laser Cladding of Cobalt-Based Alloy Based on Response Surface Methodology

Optimization of porthole extrusion die for 6063 aluminum alloy profile with thin-walled multi-cavity complex section and analysis of profile performance

Optimization of the Hole Exit Shaping of Film Holes Without and with Compound Angles for Maximal Film Cooling Effectiveness

Surrogate optimization of lithium-ion battery coating process

A Coupled DEM/CFD Analysis of Die Filling Process

Optimized Design Method for Profile Extrusion Die Based on NURBS Modeling

Optimization of Gating System Design for Die Casting of Thin Magnesium Alloy-Based Multi-Cavity LCD Housings

Slot-die processing of lithium-ion battery electrodes—Coating window characterization

Numerical simulation and optimization of liquid metal flow in the shot sleeve of cold chamber die casting process

Optimization of solidification in die casting using numerical simulations and machine learning

Optimizing die parameters of microstamping process for PEMFC 316L bipolar plate using NCL fracture criterion and response surface methodology

Improved Optimization of a Coextrusion Die with a Complex Geometry Using the Coupling Inverse Design Method

Study of Residual Wall Thickness and Multiobjective Optimization for Process Parameters of Water-Assisted Injection Molding