Abstract:In the process of promoting the commercialization of proton exchange membrane fuel cells, the long-term durability of the fuel cell has become a key consideration. While existing durability tests are critical for assessing cell performance, they are often time-consuming and do not quickly reflect the impact of actual operating conditions on the cell. In this study, improved testing protocols were utilized to solve this problem, which is designed to shorten the testing cycle and evaluate the degradation of the cell performance under real operating conditions more efficiently. Accelerated durability analysis for evaluating the MEA lifetime and performance decay process was carried out through two testing protocols—open circuit voltage (OCV)-based accelerated durability testing (ADT) and relative humidity (RH) cycling-based ADT. OCV-based ADT revealed that degradation owes to a combined mechanical and chemical process. RH cycling-based ADT shows that degradation comes from a mainly mechanical process. In situ fluoride release rate technology was employed to elucidate the degradation of the proton exchange membrane during the ADT. It was found that the proton exchange membrane suffered more serious damage under OCV-based ADT. The loss of F- after the durability test was up to 3.50 × 10−4 mol/L, which was 4.3 times that of the RH cycling-based ADT. In addition, the RH cycling-based ADT had a significant effect on the catalyst layer, and the electrochemically active surface area decreased by 48.6% at the end of the ADT. Moreover, it was observed that the agglomeration of the catalysts was more obvious than that of OCV-based ADT by transmission electron microscopy. It is worth noting that both testing protocols have no obvious influence on the gas diffusion layer, and the contact angle of gas diffusion layers does not change significantly. These findings contribute to understanding the degradation behavior of proton exchange membrane fuel cells under different working conditions, and also provide a scientific basis for developing more effective testing protocols.

Investigation on Degradation Mechanism of Hydrogen–oxygen Proton Exchange Membrane Fuel Cell under Current Cyclic Loading

Proton exchange membrane fuel cell degradation under close to open-circuit conditions

Degradation Analysis of the Core Components of Metal Plate Proton Exchange Membrane Fuel Cell Stack under Dynamic Load Cycles

Dynamic Current Cycles Effect on the Degradation Characteristic of a H2/O2 Proton Exchange Membrane Fuel Cell

Investigation of Dynamic Driving Cycle Effect on Performance Degradation and Micro-Structure Change of PEM Fuel Cell

Investigating the Effect of Start-Up and Shut-Down Cycles on the Performance of the Proton Exchange Membrane Fuel Cell by Segmented Cell Technology

Decomposition on the Degradation Mechanism of the Cathode Catalyst Layer under 1000 H of On-Road Heavy-Duty Transportation

Local resolved investigation of PEMFC performance degradation mechanism during dynamic driving cycle

Failure Behavior of Gas Diffusion Layer in Proton Exchange Membrane Fuel Cells

Degradation Differences of a Single Proton Exchange Membrane Fuel Cell: Energy Management Strategy and Dynamic Programming

Experimentally Investigation on Current Density Distribution Characteristics of Hydrogen-Oxygen Proton Exchange Membrane Fuel Cells under Dynamic Loading

Proton exchange membrane fuel cell degradation under close to open-circuit conditionsPart I: In situ diagnosis

Key Components Degradation in Proton Exchange Membrane Fuel Cells: Unraveling Mechanisms through Accelerated Durability Testing

Experimental Study on the Effect of Flow Channel Parameters on the Durability of PEMFC Stack and Analysis of Hydrogen Crossover Mechanism

Experimental Study of the Influence of Dynamic Load Cycle and Operating Parameters on the Durability of PEMFC

Effect of load-cycling amplitude on performance degradation for proton exchange membrane fuel cell

The review of the degradation mechanism of the catalyst layer of membrane electrode assembly in the proton exchange membrane fuel cell

Experimental Study on Dynamic Response Characteristics and Performance Degradation Mechanism of Hydrogen-Oxygen PEMFC During Loading

Comparison of Degradation Behaviors for Open-Ended and Closed Proton Exchange Membrane Fuel Cells During Startup and Shutdown Cycles

Degradation behavior of a proton exchange membrane fuel cell stack under dynamic cycles between idling and rated condition

A Scale-bridging Model for Proton Exchange Membrane Fuel Cells: Understanding Interactions among Multi-physics Transports, Electrochemical Reactions and Heterogeneous Aging