Abstract:Piezoelectric composites made of piezoelectric ceramic particles and polymer composites combine the performance advantages of both components and have broad application prospects. However, the preparation of complex structures is still a challenge, for which 3D printing technology provides a perfect solution. The aim of the present study is to investigate the principle and process optimization of the stereolithography of 0–3 type piezoelectric composites through simulation and experiments. In particular, a modified three-phase model of a spherical shell is applied to elucidate the influence of the elastic modulus between the ceramic particles and the matrix on the piezoelectric properties of the composites at the macroscopic level. This enables the piezoelectric properties of the composites to be predicted more accurately, and guides the surface grafting modification of piezoelectric ceramic powders. Furthermore, the problem of weak interface bonding in piezoelectric composites caused by poor compatibility between hydrophilic particles and the hydrophobic matrix is successfully solved by preprocessing the PZT ceramic powder via activating the particle surface hydroxyl groups and grafting a silane coupling agent onto the piezoelectric ceramic powder. As a result, the particles are bonded to the matrix by covalent bonds, which increases the elastic modulus of the interface transition layer and modifies the stress transfer efficiency. For instance, the piezoelectric strain constant ( d 33 ) of piezoelectric composite containing 60 wt% functionalized PZT particles is increased from 20 to 37 pC/N. The printing accuracy, piezoelectric properties, and mechanical characteristics of the piezoelectric composites are thoroughly investigated, and the reliability of the proposed theoretical model and simulation results is verified. The piezoelectric composites are uniformly compact and have a low residual pore rate. The piezoelectric composite with a solid content of 60 wt% has a volume density of 2.27 g/cm3 and a Young's modulus of 535.44 MPa. Most importantly, its piezoelectric voltage constant ( g 33 ) is 167.2 × 10−3 Vm/N, which is more than seven times higher than that of homogeneous PZT and results in high voltage sensitivity.

Direct-ink-writing of Multistage-Pore Structured Energy Collector with Ultrahigh Ceramic Content and Toughness

Study on the control of mechanical and electrical properties of 3d printed BTO/PDMS flexible porous composites

Improving the performance of flexible composites based on 3-3 interconnected skeletons for piezoelectric energy harvesting

Direct ink writing of 3D piezoelectric ceramics with complex unsupported structures

Flexible Energy Harvesting Polymer Composites Based on Biofibril-Templated 3-Dimensional Interconnected Piezoceramics

Flexible pillar-base structured piezocomposite with aligned porosity for piezoelectric energy harvesting

Fabrication of PVDF/BaTiO3/CNT Piezoelectric Energy Harvesters with Bionic Balsa Wood Structures through 3D Printing and Supercritical Carbon Dioxide Foaming

Porosity manipulation to boost piezoelectric output via supercritical carbon dioxide foaming and surface modification

3D Printing of Flexible BaTiO 3 /Polydimethylsiloxane Piezocomposite with Aligned Particles for Enhanced Energy Harvesting

Lead-Free Piezoelectric Composite Based on a Metamaterial for Electromechanical Energy Conversion

Polyvinylidene Fluoride Energy Harvester with Boosting Piezoelectric Performance through 3D Printed Biomimetic Bone Structures

Coupling of Interface Effects and Porous Microstructures in Translucent Piezoelectric Composites for Enhanced Energy Harvesting and Sensing

Hierarchically Interconnected Piezoceramic Textile with a Balanced Performance in Piezoelectricity, Flexibility, Toughness, and Air Permeability

Screen Printing of Surface-Modified Barium Titanate/Polyvinylidene Fluoride Nanocomposites for High-Performance Flexible Piezoelectric Nanogenerators

3D-printed flexible, multilayered ceramic-polymer composite grid with integrated structural-self-sensing function

Fabrication and properties of BaTiO3 ceramics via digital light processing for piezoelectric energy harvesters

Electromechanical Performance and Figure of Merit Optimization for Flexible Lead-Free PDMS- BaTiO 3 Piezocomposites

3D Printing Architecting Β-Pvdf Reservoirs for Preferential ZnO Epitaxial Growth Toward Advanced Piezoelectric Energy Harvesting

Enhanced energy density in piezoelectric PVDF-polymer nanocomposite via multiple mechanism synergetic action

High-performance piezoelectric composites via β phase programming

3D printed 0–3 type piezoelectric composites with high voltage sensitivity