Abstract:High-performance flexible piezoelectric polymer–ceramic composites are in high demand for increasing wearable energy-harvesting applications. In this work, a strategy combining solid-state shear milling (S3M) and fused filament fabrication (FFF) 3D-printing technology is proposed for the fabrication of high-performance biomimetic wearable piezoelectric poly(vinylidene fluoride) (PVDF)/tetraphenylphosphonium chloride (TPPC)/barium titanate (BaTiO3) nanocomposite energy harvesters with a biomimetic fish-scale-like metamaterial. The S3M technology could greatly improve the dispersion of BaTiO3 sub-micrometer particles and the interfacial compatibility, resulting in better processability and piezoelectric performance of the nanocomposites. Typically, the FFF 3D printed energy harvester incorporating 30 wt % BaTiO3 showed the highest piezoelectric outputs with an open-circuit voltage of 11.5 V and a short-circuit current of 220 nA. It could hence drive nine green LEDs to work normally. In addition, a 3D-printed biomimetic wearable energy harvester inspired by an environmentally adaptive fish-scale-like metamaterial was further fabricated. The fish-scale-like energy harvester could harvest energy through different deformation motions and successfully recharge a 4.7 μF capacitor by being mounted on a bicycle tire and the tire's rolling. This work not only provides a 3D printing strategy for designing diversified and complex geometric structures but also paves the way for further applications in flexible, wearable, self-powered electromechanical energy harvesters.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.2c02491.Schematic diagram of solid-state shear milling equipment, ion–dipole interaction between the positively charged surfaces of TPPC and the CH2–CF2 dipoles in PVDF molecular chains, X-ray diffraction patterns and FT-IR spectra of the printed PVDF and PVDF/BaTiO3 nanocomposites, SEM images of 3D-printed nanocomposites, schematic diagram of the COMSOL simulation of PVDF embedded with BaTiO3 nanoparticles, the piezoelectric output current of BT30 under a linear motor at different accelerations, digital photo of the biomimetic energy harvester showing a clear fish-scale structure, the COMSOL simulation results of the energy harvester with a fish-scale-like structure, and a schematic diagram of the fixed–fixed end beam model (PDF)Commercial LEDs driven by a square energy harvester (MP4)Output current generated by the fish-scale-like energy harvester as a bicycle tire rolls (MP4)Process for charging a 4.7 μF capacitor by the fish-scale-like energy harvester (MP4)This article has not yet been cited by other publications.

Polyvinylidene Fluoride Energy Harvester with Boosting Piezoelectric Performance through 3D Printed Biomimetic Bone Structures

Hierarchically Architected Polyvinylidene Fluoride Piezoelectric Foam for Boosted Mechanical Energy Harvesting and Self-Powered Sensor

Combining Solid-State Shear Milling and FFF 3D-Printing Strategy to Fabricate High-Performance Biomimetic Wearable Fish-Scale PVDF-Based Piezoelectric Energy Harvesters

Self-Poling Polyvinylidene Fluoride-Based Piezoelectric Energy Harvester Featuring Highly Oriented β-Phase Structured at Multiple Scales

Boosted Mechanical Piezoelectric Energy Harvesting of Polyvinylidene Fluoride/Barium Titanate Composite Porous Foam Based on Three-Dimensional Printing and Foaming Technology

Fabrication of PVDF/BaTiO3/CNT Piezoelectric Energy Harvesters with Bionic Balsa Wood Structures through 3D Printing and Supercritical Carbon Dioxide Foaming

3D Printing Architecting Β-Pvdf Reservoirs for Preferential ZnO Epitaxial Growth Toward Advanced Piezoelectric Energy Harvesting

Advanced 3D-printed PVDF/BT piezoelectric energy harvester with a bio-inspired 3D structure for a self-powered smart mouse

Flexible pillar-base structured piezocomposite with aligned porosity for piezoelectric energy harvesting

3D Printed Piezoelectric‐Regulable Cells with Customized Electromechanical Response Distribution for Intelligent Sensing

Flexible Energy Harvesting Polymer Composites Based on Biofibril-Templated 3-Dimensional Interconnected Piezoceramics

Enhanced energy density in piezoelectric PVDF-polymer nanocomposite via multiple mechanism synergetic action

Self-Poled Poly(vinylidene fluoride)/MXene Piezoelectric Energy Harvester with Boosted Power Generation Ability and the Roles of Crystalline Orientation and Polarized Interfaces

Solvent-Exchange-Assisted 3D Printing of Self-Polarized High β-PVDF for Advanced Piezoelectric Energy Harvesting

Porosity manipulation to boost piezoelectric output via supercritical carbon dioxide foaming and surface modification

3D-Printed Piezoelectret Based on Foamed Polylactic Acid for Energy-Harvesting and Sensing Applications

A poly(L-lactic Acid)-based flexible piezoelectric energy harvester with micro-zigzag structures

Improved Design via Simulation of Micro-Modified PVDF and its Copolymer Energy Harvester with High Electrical Outputs

Architecture Design of High‐Performance Piezoelectric Energy Harvester with 3D Metastructure Substrate

A novel concept of hierarchical porous structural design on enhancing output performance of piezoelectric nanogenerator