Abstract:High-performance flexible piezoelectric polymer–ceramic composites are in high demand for increasing wearable energy-harvesting applications. In this work, a strategy combining solid-state shear milling (S3M) and fused filament fabrication (FFF) 3D-printing technology is proposed for the fabrication of high-performance biomimetic wearable piezoelectric poly(vinylidene fluoride) (PVDF)/tetraphenylphosphonium chloride (TPPC)/barium titanate (BaTiO3) nanocomposite energy harvesters with a biomimetic fish-scale-like metamaterial. The S3M technology could greatly improve the dispersion of BaTiO3 sub-micrometer particles and the interfacial compatibility, resulting in better processability and piezoelectric performance of the nanocomposites. Typically, the FFF 3D printed energy harvester incorporating 30 wt % BaTiO3 showed the highest piezoelectric outputs with an open-circuit voltage of 11.5 V and a short-circuit current of 220 nA. It could hence drive nine green LEDs to work normally. In addition, a 3D-printed biomimetic wearable energy harvester inspired by an environmentally adaptive fish-scale-like metamaterial was further fabricated. The fish-scale-like energy harvester could harvest energy through different deformation motions and successfully recharge a 4.7 μF capacitor by being mounted on a bicycle tire and the tire's rolling. This work not only provides a 3D printing strategy for designing diversified and complex geometric structures but also paves the way for further applications in flexible, wearable, self-powered electromechanical energy harvesters.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.2c02491.Schematic diagram of solid-state shear milling equipment, ion–dipole interaction between the positively charged surfaces of TPPC and the CH2–CF2 dipoles in PVDF molecular chains, X-ray diffraction patterns and FT-IR spectra of the printed PVDF and PVDF/BaTiO3 nanocomposites, SEM images of 3D-printed nanocomposites, schematic diagram of the COMSOL simulation of PVDF embedded with BaTiO3 nanoparticles, the piezoelectric output current of BT30 under a linear motor at different accelerations, digital photo of the biomimetic energy harvester showing a clear fish-scale structure, the COMSOL simulation results of the energy harvester with a fish-scale-like structure, and a schematic diagram of the fixed–fixed end beam model (PDF)Commercial LEDs driven by a square energy harvester (MP4)Output current generated by the fish-scale-like energy harvester as a bicycle tire rolls (MP4)Process for charging a 4.7 μF capacitor by the fish-scale-like energy harvester (MP4)This article has not yet been cited by other publications.

Hierarchically Architected Polyvinylidene Fluoride Piezoelectric Foam for Boosted Mechanical Energy Harvesting and Self-Powered Sensor

Hierarchically Structured Hollow PVDF Nanofibers for Flexible Piezoelectric Sensor

Polyvinylidene Fluoride Energy Harvester with Boosting Piezoelectric Performance through 3D Printed Biomimetic Bone Structures

A novel concept of hierarchical porous structural design on enhancing output performance of piezoelectric nanogenerator

A self-powered piezoelectric Poly(vinyl alcohol)/Polyvinylidene fluoride fiber membrane with alternating multilayer porous structure for energy harvesting and wearable sensors

Boosted Mechanical Piezoelectric Energy Harvesting of Polyvinylidene Fluoride/Barium Titanate Composite Porous Foam Based on Three-Dimensional Printing and Foaming Technology

Enhanced Piezoelectric Performance of Various Electrospun PVDF Nanofibers and Related Self-Powered Device Applications

Electrospun Polyvinylidene Fluoride Nanogenerator with Hydrophobic Properties and Enhanced Energy Harvesting for Wearable and Wireless Sensing

Fabrication of PVDF/BaTiO3/CNT Piezoelectric Energy Harvesters with Bionic Balsa Wood Structures through 3D Printing and Supercritical Carbon Dioxide Foaming

Self-Poling Polyvinylidene Fluoride-Based Piezoelectric Energy Harvester Featuring Highly Oriented β-Phase Structured at Multiple Scales

Porosity manipulation to boost piezoelectric output via supercritical carbon dioxide foaming and surface modification

Self-Poled Poly(vinylidene fluoride)/MXene Piezoelectric Energy Harvester with Boosted Power Generation Ability and the Roles of Crystalline Orientation and Polarized Interfaces

Flexible pillar-base structured piezocomposite with aligned porosity for piezoelectric energy harvesting

Long‐Lasting, Steady and Enhanced Energy Harvesting by Inserting a Conductive Layer into the Piezoelectric Polymer

Porous, Self-Polarized Ferroelectric Polymer Films Exhibiting Behavior Reminiscent of Morphotropic Phase Boundary Induced by Size-Dependent Interface Effect for Self-Powered Sensing

Combining Solid-State Shear Milling and FFF 3D-Printing Strategy to Fabricate High-Performance Biomimetic Wearable Fish-Scale PVDF-Based Piezoelectric Energy Harvesters

Effective-performance of inorganic and organic (barium zirconium titanate/polyvinylidene fluoride) piezoelectric composite for energy harvesting and self-powered smart IoT-based electronics

Nanosheet‐Doped Polymer Composites with High Intrinsic Piezoelectric Properties for Energy Harvesting

Coupling of Interface Effects and Porous Microstructures in Translucent Piezoelectric Composites for Enhanced Energy Harvesting and Sensing

A piezoelectric human motion energy harvester with stress amplification mechanism

Efficiently Fabricated Core-Sheath Piezoelectric Sensor Based on PVDF Microfibrillar Bundle