Abstract:High-performance flexible piezoelectric polymer–ceramic composites are in high demand for increasing wearable energy-harvesting applications. In this work, a strategy combining solid-state shear milling (S3M) and fused filament fabrication (FFF) 3D-printing technology is proposed for the fabrication of high-performance biomimetic wearable piezoelectric poly(vinylidene fluoride) (PVDF)/tetraphenylphosphonium chloride (TPPC)/barium titanate (BaTiO3) nanocomposite energy harvesters with a biomimetic fish-scale-like metamaterial. The S3M technology could greatly improve the dispersion of BaTiO3 sub-micrometer particles and the interfacial compatibility, resulting in better processability and piezoelectric performance of the nanocomposites. Typically, the FFF 3D printed energy harvester incorporating 30 wt % BaTiO3 showed the highest piezoelectric outputs with an open-circuit voltage of 11.5 V and a short-circuit current of 220 nA. It could hence drive nine green LEDs to work normally. In addition, a 3D-printed biomimetic wearable energy harvester inspired by an environmentally adaptive fish-scale-like metamaterial was further fabricated. The fish-scale-like energy harvester could harvest energy through different deformation motions and successfully recharge a 4.7 μF capacitor by being mounted on a bicycle tire and the tire's rolling. This work not only provides a 3D printing strategy for designing diversified and complex geometric structures but also paves the way for further applications in flexible, wearable, self-powered electromechanical energy harvesters.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.2c02491.Schematic diagram of solid-state shear milling equipment, ion–dipole interaction between the positively charged surfaces of TPPC and the CH2–CF2 dipoles in PVDF molecular chains, X-ray diffraction patterns and FT-IR spectra of the printed PVDF and PVDF/BaTiO3 nanocomposites, SEM images of 3D-printed nanocomposites, schematic diagram of the COMSOL simulation of PVDF embedded with BaTiO3 nanoparticles, the piezoelectric output current of BT30 under a linear motor at different accelerations, digital photo of the biomimetic energy harvester showing a clear fish-scale structure, the COMSOL simulation results of the energy harvester with a fish-scale-like structure, and a schematic diagram of the fixed–fixed end beam model (PDF)Commercial LEDs driven by a square energy harvester (MP4)Output current generated by the fish-scale-like energy harvester as a bicycle tire rolls (MP4)Process for charging a 4.7 μF capacitor by the fish-scale-like energy harvester (MP4)This article has not yet been cited by other publications.

3D Printing of Flexible BaTiO 3 /Polydimethylsiloxane Piezocomposite with Aligned Particles for Enhanced Energy Harvesting

Customizing Three-Dimensional Elastic Barium Titanate Sponge for Intelligent Piezoelectric Sensing

Electromechanical Performance and Figure of Merit Optimization for Flexible Lead-Free PDMS- BaTiO 3 Piezocomposites

Screen Printing of Surface-Modified Barium Titanate/Polyvinylidene Fluoride Nanocomposites for High-Performance Flexible Piezoelectric Nanogenerators

Fabrication of PVDF/BaTiO3/CNT Piezoelectric Energy Harvesters with Bionic Balsa Wood Structures through 3D Printing and Supercritical Carbon Dioxide Foaming

Fabrication and properties of BaTiO3 ceramics via digital light processing for piezoelectric energy harvesters

Flexible composites with Ce-doped BaTiO3/P(VDF-TrFE) nanofibers for piezoelectric device

Flexible pillar-base structured piezocomposite with aligned porosity for piezoelectric energy harvesting

Study on the control of mechanical and electrical properties of 3d printed BTO/PDMS flexible porous composites

Enhanced energy harvesting ability of polydimethylsiloxane-BaTiO3-based flexible piezoelectric nanogenerator for tactile imitation application

Combining Solid-State Shear Milling and FFF 3D-Printing Strategy to Fabricate High-Performance Biomimetic Wearable Fish-Scale PVDF-Based Piezoelectric Energy Harvesters

Boosted Mechanical Piezoelectric Energy Harvesting of Polyvinylidene Fluoride/Barium Titanate Composite Porous Foam Based on Three-Dimensional Printing and Foaming Technology

Porosity manipulation to boost piezoelectric output via supercritical carbon dioxide foaming and surface modification

Mechanical Energy Harvesting and Specific Potential Distribution of a Flexible Piezoelectric Nanogenerator Based on 2-D BaTiO 3 -Oriented Polycrystals

Effective-performance of inorganic and organic (barium zirconium titanate/polyvinylidene fluoride) piezoelectric composite for energy harvesting and self-powered smart IoT-based electronics

3D printed piezoelectric BNNTs nanocomposites with tunable interface and microarchitectures for self-powered conformal sensors

Three-dimensional polydimethylsiloxane/barium titanate elastomer networks for piezoelectric energy harvesters

Advancing High-Performance Piezoelectric Nanogenerators: Simple Electric Field Switching for Orientated and Aligned BaTiO 3 /PDMS Composite

3D-Printing Piezoelectric Composite with Honeycomb Structure for Ultrasonic Devices

Three-dimensional piezoelectric polymer microsystems for vibrational energy harvesting, robotic interfaces and biomedical implants

Interface induced performance enhancement in flexible BaTiO3/PVDF-TrFE based piezoelectric nanogenerators