Abstract:The development of a flexible wearable piezoelectric power device has recently caught extensive attention, especially in making inorganic piezoelectric ceramics into polymers from a composite with excellent piezoelectric response. As inorganic piezoelectric fillers, an oriented polycrystal can improve the mechanical energy efficiency of piezoelectric nanogenerators. Herein, the two-dimensional BaTiO3-oriented polycrystals are prepared via a two-step hydrothermal process based on a topochemical conversion mechanism. Additionally, a high-performance piezoelectric nanogenerator was successfully fabricated using the polydimethylsiloxane (PDMS) polymer and BaTiO3-oriented polycrystals. The flexible piezoelectric nanogenerator with 30 wt % BaTiO3 exhibited optimal piezoelectric performance, with an output open-circuit voltage of 13.0 V and a short-circuit current of 200 nA under a periodic mechanical bend–release mode. More importantly, an effective power of approximately 2.6 μW was achieved at a low load resistance of 35 MΩ, suggesting a large potential for applications of electronic skins and self-powered devices. The device efficiently harvests biomechanical energy from human activities and exhibits stable output voltage and current of approximately 8 V and 150 nA, respectfully, demonstrating great promise as a wearable energy harvester. This work demonstrates that oriented nanocrystals in combination with a polymer matrix can lead to the design of high-efficiency piezoelectric nanogenerators that are particularly useful in artificial intelligence, soft robotics, and biomedical devices.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssuschemeng.1c07875.XRD and FE-SEM of the KTLO and HTO crystals. Raman spectra of composite films. SEM-EDS mapping images of composite film. Piezoelectric coefficients (d33) of the composite films. P–E hysteresis loop for the BT ceramics and PDMS film. Output performance of the PENG devices with different BT weight fractions. Schematic diagram of the test circuit. Calculated results of the stress distribution. (PDF)This article has not yet been cited by other publications.

Advancing High-Performance Piezoelectric Nanogenerators: Simple Electric Field Switching for Orientated and Aligned BaTiO 3 /PDMS Composite

Advancing High-Performance Piezoelectric Nanogenerators: Simple Electric Field Switching for Orientated and Aligned BaTiO3/PDMS Composite

Piezoelectric Nanogenerators Based on Electrospun PVDF-Coated Mats Composed of Multilayer Polymer-Coated BaTiO3 Nanowires

Piezoelectric Nanogenerators Based On BaTiO3/PDMS Composites for High-Frequency Applications

Controllable Core-Shell BaTiO<sub>3</sub>@Carbon Nanoparticle-Enabled P(VDF-TrFE) Composites: A Cost-Effective Approach to High-Performance Piezoelectric Nanogenerators

Screen Printing of Surface-Modified Barium Titanate/Polyvinylidene Fluoride Nanocomposites for High-Performance Flexible Piezoelectric Nanogenerators

The Construction of BaTiO3-based Core-Shell Composites for High-Performance and Flexible Piezoelectric Nanogenerators

The construction of BaTiO 3 -based core-shell composites for high-performance and flexible piezoelectric nanogenerators

Mechanical Energy Harvesting and Specific Potential Distribution of a Flexible Piezoelectric Nanogenerator Based on 2-D BaTiO 3 -Oriented Polycrystals

Piezoelectric boron nitride nanosheets for high performance energy harvesting devices

Tribo-piezoelectric Synergistic BaTiO 3 /PDMS Micropyramidal Structure for High-performance Energy Harvester and High-sensitivity Tactile Sensing

Interface induced performance enhancement in flexible BaTiO3/PVDF-TrFE based piezoelectric nanogenerators

Three-dimensional polymer-nanoparticle-liquid ternary composite for ultrahigh augmentation of piezoelectric nanogenerators

Electromechanical Performance and Figure of Merit Optimization for Flexible Lead-Free PDMS- BaTiO 3 Piezocomposites

Mechanical Energy Harvesting and Specific Potential Distribution of a Flexible Piezoelectric Nanogenerator Based on 2-D BaTiO3-Oriented Polycrystals

Current Achievements in Flexible Piezoelectric Nanogenerators Based on Barium Titanate

Polydimethylsiloxane/BaTiO3 Nanogenerators with a Surface-Assembled Mosaic Structure for Enhanced Piezoelectric Sensing

Interface modulated 0-D piezoceramic nanoparticles/PDMS based piezoelectric composites for highly efficient energy harvesting application

Boosting Performance of Self-Polarized Fully Printed Piezoelectric Nanogenerators via Modulated Strength of Hydrogen Bonding Interactions

Electrospun Poly(vinylidene Fluoride)-Based Nanogenerator Modified by Rutile/Anatase-Heterostructured TiO2 Nanorods for Piezoelectricity

Piezoelectric Nanogenerator Based on Lead-Free Flexible PVDF-Barium Titanate Composite Films for Driving Low Power Electronics