Abstract:Abstract The permanent implantation of stents with and without carrying drugs led to the unresolvable long-term complications such as restenosis and thrombosis. There are increasing interests in bioresorbable stents, which have the potential to resume the vessel tone and mitigate complications. The bioresorbable stent served as a temporary scaffold for an expected period of 6 to 12 months. The design of both polymeric material and stent structure is acknowledged to impact the mechanical integrity of bioresorbable stent. Poly-l-lactide (PLLA), a polymer-based material, is the most adopted bioresorbable stent materials due to its sufficient strength and degradation resistance. The mechanical performances of the PLLA stents need to be evaluated before it is considered to serve in the clinical application. Because of difficulty and time-consuming of physical tests, finite element method (FEM) has become an efficient way to solve the problem. However, the mechanical performances of PLLA stents during the degradation process could not be fully captured using the existing numerical models. A strain-based degradation numerical model with consideration of stent-artery interaction was proposed based on the previous published experimental data. In this model, the elongation fracture of the PLLA material was correlated to the degradation degree, a scalar factor controlled by the time and local strain. The degradation evolution process was then fully captured after the stent implantation using the derived material model. With continuously loss of mass in material, the degradation rates were not uniform in different locations along the stent structure. Severe degradation was observed at the higher strain regions of the stent, which locates at the outer surface of the stent, near the crowns of the ring stent strut. At first stage of degradation, the stent strut thinning was observed in the model which was also found in the previous experimental study. At second stage of degradation, the degradation happened at the connection region between the link strut and ring struts which resulted in the break of mechanical integrity. The diameter of the vessel has minor change during the first stage of the degradation process, while at the second stage, with the breakdown of the ring structure, the vessel recoiled to its original diameter in one month time. The two-staged degradation process showed a vision for the ideal stent design. The developed computational model provided more insights into the degradation process, which could complement the discrete experimental data for improving the design and clinical management of the bioresorbable vascular scaffold.

Evaluation of Poly (L-Lactic Acid) Monofilaments with High Mechanical Performance in Vitro Degradation

Failure signal of high orientation Poly(L-lactic acid) monofilament for self-expanding stent during lifetime: Disappeared amorphous connections

Key Factors of Mechanical Strength and Toughness in Oriented Poly(l-lactic Acid) Monofilaments for a Bioresorbable Self-Expanding Stent.

A Poly(l‐lactic Acid) Braided Stent with High Mechanical Properties During in Vitro Degradation in Bile

Experimental Investigation on the Properties of Poly (l‐lactic Acid) Vascular Stent after Accelerated in Vitro Degradation

Regulating mechanical performance of poly (l-lactide acid) stent by the combined effects of heat and aqueous media

Poly(l-lactic Acid) Monofilaments for Biodegradable Braided Self-Expanding Stent

Evaluation of Mechanical Properties of Poly( L ‐lactic Acid) Braided Stents with Axial Stiffeners

Computational and Experimental Investigation into Mechanical Performances of Poly-L-Lactide Acid (PLLA) Coronary Stents

A Poly(l‐lactic Acid) Monofilament with High Mechanical Properties for Application in Biodegradable Biliary Stents

A hazardous boundary of Poly(L-lactic acid) braided stent design: Limited elastic deformability of polymer materials

Mixed-braided Stent: an Effective Way to Improve Comprehensive Mechanical Properties of Poly (L-Lactic Acid) Self-Expandable Braided Stent.

Preparation of a poly(L-lactic acid) braided stent with high radial force

Design and characterization of PLLA stents with Z-structure

In Silico Evaluation of In Vivo Degradation Kinetics of Poly(Lactic Acid) Vascular Stent Devices

Strain-Based Degradation Model With Application to Poly-L-Lactide Acid (PLLA) Artery Stent

Effects of Annealing Constraint Methods on Poly(l‐lactic Acid) Monofilaments for Application in Stents Annealing

Evaluation of Resistance to Radial Cyclic Loads of Poly(l-Lactic Acid) Braided Stents with Different Braiding Angles.

Mechanical Properties and Degradation of Polydioxanone Stents

The Effect of Intrinsic Characteristics on Mechanical Properties of Poly(l-Lactic Acid) Bioresorbable Vascular Stents.

In Vitro Degradation Behavior of L-Lactide/Trimethylene Carbonate/Glycolide Terpolymers and A Composite with Poly(L-Lactide-Co-Glycolide) Fibers