Abstract:As part of the zinc hydrometallurgy plant, the iron removal process is a complex system with four cascaded reactors. Tighter process-index control is difficult to achieve due to the complicated, long, and time-varying removal process. The control performance is also affected by the quality of the ore source and external disturbances. Little research is documented in the literature to address these difficulties and manual control is widely used. An innovative hybrid control strategy is developed to control the iron removal process indices within narrow ranges with minimum cost of additive regents, including oxygen and zinc oxide. This strategy is composed of an optimal setting model, a model-based optimal controller, an integrated prediction model, a fuzzy-logic-based feedforward compensator, and a model feedback adjustor. The optimal setting model automatically optimizes the set-points of the process indices under different production conditions. To achieve the process requirements with minimal cost, the model-based optimal controller is designed. The integrated prediction model is established to provide a more accurate on-line prediction of the process indices by integrating the mechanism prediction model and an error compensation model based on the least-square support vector machine. Based on the predicted process indices, the compensator is developed for the optimal controller. The adjustor provides a parameter adjustment mechanism. Four-week-long industrial experiments in the largest zinc hydrometallurgy plant in China show that the control strategy can not only improve the process-indexes control performance, but also save 6.55 oxygen and 4.61 zinc oxide consumptions, which translates to 222858m3 oxygen and 1236t zinc oxide per year (a saving of about $570000). The hybrid control strategy can be extended to cover other similar processes in the zinc hydrometallurgy and other industries.

Intelligent Setting of Zinc Dust Dosage for a Cobalt Removal Process Based on Estimation of Zinc Dust Utilization Ratio

Synergetic Utilization of Zinc-Bearing Dust by Carbothermic Reduction-Roasting Process: Phase Transformation and Morphological Evolution

Automatic detection system with efficient and accurate sample preparation for cobalt ion concentration in zinc hydrometallurgy

Study on the Reaction Mechanism of Multi-Source Metallurgical Dust for Zinc Extraction and Iron Enrichment

A novel approach for the resource utilization of zinc-bearing dust and sludge via the blast furnace main trough

Low Carbon and High Efficient Utilization of Zinc-bearing Dust in Iron & Steel Industry by Rotary Kiln Process

Mineral Phase Reconstruction and Separation Behavior of Zinc and Iron from Zinc-Containing Dust

Kinetics and mechanism for efficient Co(II) removal from zinc sulfate solution by ultrasonic-enhanced zinc powder replacement

Closed-Loop Process of Extracting and Separating Zinc Impurities from Industrial Cobalt Products—Pilot Test Study

A Hybrid Control Strategy for Real-Time Control of the Iron Removal Process of the Zinc Hydrometallurgy Plants

Optimal Setting and Control for Iron Removal Process Based on Adaptive Neural Network Soft-Sensor

A high-efficiency separation process of Fe and Zn from zinc-bearing dust by direct reduction

Removal behavior of Zn and alkalis from blast furnace dust in pre-reduction sinter process

Multi-objective optimization of clean utilization for zinc leaching residues by rotary kiln using neural network coupled modeling

Kinetic Analysis of Recovering Zinc from Electric Arc Furnace Dust by Vacuum Carbothermic Reduction at 20 Pa

Parameter optimal identification and dynamic behavior analysis of nonlinear model for the solution purification process of zinc hydrometallurgy

Separation of Iron and Zinc Values from Blast Furnace Dust Adopting Reduction Roasting-Magnetic Separation Method by Sawdust Pyrolysis

Zinc-ion concentration control based on mechanical model of zinc electrowinning process

Optimisation of hybrid process to recover zinc from electric arc furnace dust using design of experiment approach

Rotary hearth furnace for steel solid waste recycling: Mathematical modeling and surrogate-based optimization using industrial-scale yearly operational data

Fuel Consumption Dependence on a Share of Reduction Processes in Imperial Smelting Furnace