Abstract:Small size and high efficiency of micro gas turbines require a higher surface-to-volume ratio of recuperators. Conventional recuperators can achieve a range of 250–3600 m 2 /m 3 . Advances in materials and manufacturing, such as metal foams, can increase significantly the exchange surface and improve compactness ranging approximately from 500 to over 10,000 m 2 /m 3 , due to their exceptional micro geometry. The main advantage is that the increase of surface area does not impact the cost of the heat exchanger as much as conventional recuperators due to their easy manufacturing. This work addresses the optimisation of the recuperator using multiple objectives satisfying efficiency, power output and weight criteria, offering a holistic approach that takes into account the entire system rather than individual components or channels. A model is developed to represent the performance of a compact heat exchanger in micro gas turbines. The recuperator is an annular heat exchanger with involute profile filled with porous media in a counterflow arrangement on the hot and cold sides. The model allows the evaluation of the effect of the recuperator geometry features on the electrical efficiency, power output and weight savings in a micro gas turbine. Existing models for the global heat transfer coefficient, effective thermal conductivity, surface area and pressure drop of porous media are selected and implemented. The design variables of multi-objective are the pore density, porosity and number of channels, whilst the objectives are the overall electrical efficiency, power output and recuperator weight. The problem is solved using the Non-Dominated Sorting Genetic Algorithm (NSGA-II) to determine an approximation of the Pareto front, whilst the accuracy of the approximation is assessed against the solution obtained by an exhaustive search. The comparison shows that NSGA-II outperforms an exhaustive search by at least 90 % in terms of computational efficiency. These results allow the quantification of the impact of metal foam technology on performance metrics of the recuperator as well as the entire system. This quantitative analysis provides valuable insights into the behaviour of metal foam recuperators in micro gas turbines. An optimal design with 30 % efficiency and 28 kW power output appears in pore densities of approximately 10 and 20 pores per inch (PPI) for the air and gas side respectively, and a porosity of 85 %, which leads to a state-of-the-art recuperator weight of 48 kg. The efficiency improvement over the industry standard is 15 %, with only a 2.5 % reduction in power output.

Multi-objective Optimal Design of NACA Airfoil Fin PCHE Recuperator for Micro-Gas Turbine Systems

Multi-objective Optimization of Transpiration Cooling for High Pressure Turbine Vane

Enhancing Plate-Fin Heat Exchanger Hydraulic Thermal Performance Through Air-Side Fin Optimization Based on Pseudo-3D Topology Optimization

Three-dimensional shape optimization of fins in a printed circuit recuperator using S-CO2 as the heat-transfer fluid

Numerical thermal–hydraulic analysis and multiobjective design optimization of a printed circuit heat exchanger with airfoil overlap fin channels

Metal foam recuperators on micro gas turbines: Multi-objective optimisation of efficiency, power and weight

Recuperators for Micro Gas Turbines: A Review

Influence of recuperater design parameter on micro has turbine performance

Configuration Parameters Design and Optimization for Plate-Fin Heat Exchangers with Serrated Fin by Multi-Objective Genetic Algorithm

Design Optimization of Plate-Fin Heat Exchanger in a Gas Turbine and Supercritical Carbon Dioxide Combined Cycle with Thermal Oil Loop

Genetic Algorithm Optimization for Primary Surfaces Recuperator of Microturbine

Numerical Study and Optimization of Thermoelectric-Hydraulic Performance of a Novel Thermoelectric Generator Integrated Recuperator

Three-Dimensional Stress Analysis And Configuration Optimization Of Cross Wavy Primary Surface Recuperator For Microturbine System

Multi-objective optimization research of printed circuit heat exchanger based on RSM and NSGA-II

Research on optimization of structural parameters for airfoil fin PCHE based on machine learning

Performance study on a printed circuit heat exchanger composed of novel airfoil fins for supercritical CO2 cycle cooling system

Experimental Investigation of Thermal and Hydrodynamic Performances of a Partial Cross-Wavy Recuperator for Microturbine Applications

Multi-Objective Design Optimization of Rotating Regenerative Air Preheater Using Genetic Algorithm

Fluid-Thermal-Mechanical Coupled Analysis and Optimized Design of Printed Circuit Heat Exchanger with Airfoil Fins of S-CO 2 Brayton Cycle

Fluid-Thermal-Mechanical Coupled Analysis and Optimized Design of Printed Circuit Heat Exchanger with Airfoil Fins of S-CO2 Brayton Cycle

Optimization of the Blade Profile and Cooling Structure in A Gas Turbine Stage Considering Both the Aerodynamics and Heat Transfer