Abstract:Small size and high efficiency of micro gas turbines require a higher surface-to-volume ratio of recuperators. Conventional recuperators can achieve a range of 250–3600 m 2 /m 3 . Advances in materials and manufacturing, such as metal foams, can increase significantly the exchange surface and improve compactness ranging approximately from 500 to over 10,000 m 2 /m 3 , due to their exceptional micro geometry. The main advantage is that the increase of surface area does not impact the cost of the heat exchanger as much as conventional recuperators due to their easy manufacturing. This work addresses the optimisation of the recuperator using multiple objectives satisfying efficiency, power output and weight criteria, offering a holistic approach that takes into account the entire system rather than individual components or channels. A model is developed to represent the performance of a compact heat exchanger in micro gas turbines. The recuperator is an annular heat exchanger with involute profile filled with porous media in a counterflow arrangement on the hot and cold sides. The model allows the evaluation of the effect of the recuperator geometry features on the electrical efficiency, power output and weight savings in a micro gas turbine. Existing models for the global heat transfer coefficient, effective thermal conductivity, surface area and pressure drop of porous media are selected and implemented. The design variables of multi-objective are the pore density, porosity and number of channels, whilst the objectives are the overall electrical efficiency, power output and recuperator weight. The problem is solved using the Non-Dominated Sorting Genetic Algorithm (NSGA-II) to determine an approximation of the Pareto front, whilst the accuracy of the approximation is assessed against the solution obtained by an exhaustive search. The comparison shows that NSGA-II outperforms an exhaustive search by at least 90 % in terms of computational efficiency. These results allow the quantification of the impact of metal foam technology on performance metrics of the recuperator as well as the entire system. This quantitative analysis provides valuable insights into the behaviour of metal foam recuperators in micro gas turbines. An optimal design with 30 % efficiency and 28 kW power output appears in pore densities of approximately 10 and 20 pores per inch (PPI) for the air and gas side respectively, and a porosity of 85 %, which leads to a state-of-the-art recuperator weight of 48 kg. The efficiency improvement over the industry standard is 15 %, with only a 2.5 % reduction in power output.

Influence of recuperater design parameter on micro has turbine performance

Research on performance of micro gas turbine recuperator: A review

Recuperators for Micro Gas Turbines: A Review

Optimized Design of the Volute Between Turbine and Regenerator in Micro Gas Turbine

Investigation on Recuperator Performance Variation into Gas Turbine

COMPARISON OF HEAT TRANSFER SURFACES FOR MICROTURBINE RECUPERATORS

Multi-objective Optimal Design of NACA Airfoil Fin PCHE Recuperator for Micro-Gas Turbine Systems

Cfd Optimization Of Gas Inlet Configuration For 100kw Microturbine Recuperator

The application characteristics of plate-fin recuperator for HTGR

Experimental Investigation of Thermal and Hydrodynamic Performances of a Partial Cross-Wavy Recuperator for Microturbine Applications

Performance of simple/recuperation cycle gas turbines under variable conditions

Steady-State and Transient Investigation of the Primary Surface Recuperator for Microturbines

Numerical Simulation Of Gas Flow And Heat Transfer In Cross-Wavy Primary Surface Channel For Microtubine Recuperators

Finite Element Analysis of Stress on Cross-Wavy Primary Surface Recuperator Based on Thermal-Structural Coupling Model

Experimental Investigation on Heat Transfer and Pressure Drop in a Microtubine Recuperator with Cross-Wavy Primary Surface Channels

Three-Dimensional Stress Analysis And Configuration Optimization Of Cross Wavy Primary Surface Recuperator For Microturbine System

Investigations of heat transfer and friction characteristics of compact cross-corrugated recuperators

Dynamic Modeling for Compact Recuperator in Helium Gas Turbine Direct-Cycle System

Metal foam recuperators on micro gas turbines: Multi-objective optimisation of efficiency, power and weight

Experimental study of the mechanism governing the HAT (humid air turbine) cycle performance of a split-shaft micro gas turbine

Stress Analysis of Surface Type Recuperator in a Micro-gas Turbine System