Abstract:In this paper, a three-dimensional (3D) numerical model coupling of CFD-DEM with chemical reaction has been developed to study the combustion process in lab-scale bubbling fluidized beds. The gas phase is modeled with k-c turbulent model and the solid phase is modeled with discrete element method (DEM). The dense gas-solid flow, heat transfer, and comprehensive chemical reaction are simultaneously considered. The reactive submodel includes the fuel pyrolysis, combustion of char and volatiles (CO, H-2, CH4, tar), formation and reduction of gaseous pollutants (NO, N2O, and SO2). The established model is first validated by the simulation of the combustion of single char particle in a quasi-3D fluidized bed. The flow patterns, distributions of particle temperature and combustion gas compositions are comparatively analyzed. The heat released by char combustion raises the temperature of surrounding particles, and meanwhile, CO and CO2 are generated at the same position as char particle. The variations of temperature, char particle diameter, and CO2 concentration with time are compared with experimental data, showing good agreements. Based on model validation, the simulations are performed to study the coal combustion in a 3D cylindrical fluidized bed. The computational domain contains about 110,000 spherical particles. The general flow pattern, distributions of gas and solid temperature, and concentrations of gas compositions inside the reactor are obtained. The effects of excess air coefficients on the particle temperature and gaseous pollutants emissions are also analyzed. The results show that the particle temperature rises rapidly in the initial stage and then tends to be a stable value, accompanied by the oscillation throughout the evolution. An increase in excess air coefficient Causes the increase of emissions of NO, N2O, and SO2. The current numerical model presents a promising way to predict the flow behaviors and reactive characteristics for dense particle reaction system at both macro- and meso-scales. (C) 2019 Elsevier B.V. All rights reserved.

Coarse-grained CFD-DEM Modelling of Dense Gas-Solid Reacting Flow

Multi-Scale Simulation of Biomass Gasification in Fluidized Beds

Development and Verification of Coarse‐grain CFD‐DEM for Nonspherical Particles in a Gas–solid Fluidized Bed

CFD-DEM Simulation of Fluidized Bed with an Immersed Tube Using a Coarse-Grain Model

Multi-level Coarse-Grained Discrete Element Method Modeling of Cylinder Particle Flow in a Rotating Drum

Modeling and validation of coarse-grained computational fluid dynamics–discrete element method for dense gas–solid flow simulation in a bubbling fluidized bed

CFD-DEM modeling of dense gas-solid reacting flow in the framework of GPU

CFD-DEM Modeling of Rod-Like Particles in a Fluidized Bed with Complex Geometry

Development and verification of coarse‐grain CFD‐DEM for non‐spherical particles in a gas‐solid fluidized bed

A Dynamic Coarse Grain Discrete Element Method for Gas-Solid Fluidized Beds by Considering Particle-Group Crushing and Polymerization

CFD–DEM simulation of biomass gasification with steam in a fluidized bed reactor

Use of compromise-based local porosities for coarse grid DEM simulation of bubbling fluidized bed with large particles

Biomass Steam Gasification in Bubbling Fluidized Bed for Higher-H2 Syngas: CFD Simulation with Coarse Grain Model

Experimental and Eulerian-Lagrangian-Lagrangian Study of Binary Gas-Solid Flow Containing Particles of Significantly Different Sizes

Coarse-grained CFD-DEM simulation of coal and biomass co-gasification process in a fluidized bed reactor: Effects of particle size distribution and operating pressure

Coupling of CFD-DEM and Reaction Model for 3D Fluidized Beds

An augmented coarse-grained CFD-DEM approach for simulation of fluidized beds

The Gasification of Biomass: A Dynamic 3-D Coupling Study in Euler-Lagrange Discrete Element Methods (DEM)

Verification of coarse-grained CFD-DEM method in multiple flow regimes

Influences of Operating Parameters on the Fluidized Bed Coal Gasification Process: A Coarse-Grained CFD-DEM Study

Study of air-steam gasification of spherocylindrical biomass particles in a fluidized bed by using CFD-DEM coupling with the multi-sphere model