Abstract:A novel fiber structure, coreless side-polished fiber (CSPF) that is wrapped by polydimethylsiloxane (PDMS), is demonstrated to be highly sensitive to temperature because of the high refractive index sensitivity of the CSPF and the large thermal optic coefficient of the PDMS. Our numerical and experimental results show that the several dips in the transmitted spectra of PDMSW-CSPF is originated from the multimode interference (MMI) in the CSPF and will blueshift with the increase of temperature. Furthermore, for such a PDMSW-CSPF, we investigate its temperature sensing characteristics and the influences of residual thickness (RT) and dip wavelength on the sensitivity both numerically and experimentally. In the temperature range of 30~85°C, the PDMSW-CSPF with RT = 43.26 μm exhibits a high temperature sensitivity of -0.4409 nm/°C, the high linearity of 0.9974, and the high stability with low standard deviation of 0.141 nm. Moreover, in the cycle experiments, where the environmental temperature was set to automatically increase and then decrease, the PDMSW-CSPF exhibits a low relative deviation of sensitivity (RSD) of down to ± 0.068%. Here, the RSD is defined as the ratio of sensitivity deviation to the average sensitivity measured in the heating/cooling cycle experiments. The lower RSD indicates that PDMSW-CSPF has better reversibility than other fiber structure. The investigations also show that the sensitivity of the PDMSW-CSPF could be enhanced further by reducing the residual thickness and choosing the dip at a longer wavelength.

A Tapered Single-Mode Optical Fiber Coated with Polydimethylsiloxane for Temperature Sensing Using Self-Phase Modulation Effect

Highly Sensitive Temperature Sensor Using Intrinsic Mach-Zehnder Interferometer Formed by Bent Micro-Fiber Embedded in Polymer

A High Sensitivity Temperature Sensor Based on Balloon-Shaped Bent SMF Structure with Its Original Polymer Coating

The Polydimethylsiloxane Coated Fiber Optic for All Fiber Temperature Sensing Based on the Multithin–Multifiber Structure

Tapered Optical Fiber Sensing Technology

High Sensitivity Temperature Sensor Based on Singlemode-No-core-singlemode Fibre Structure and Alcohol

High Performance All-Fiber Temperature Sensor Based on Coreless Side-Polished Fiber Wrapped with Polydimethylsiloxane.

PDMS-Coated S-Tapered Fiber for Highly Sensitive Measurements of Transverse Load and Temperature

High sensitivity gas pressure and temperature optical sensors based on tapered no-core fiber coated with polydimethylsiloxane (PDMS)

Inexpensive optical fiber Fabry–Perot microcavity with controllable length for sensitive temperature measurements

Temperature Fiber Sensor Without Cross Sensitivity Based on the Multi-Thin-no-thin-multi Fiber Coated with PDMS

Temperature Sensing Characteristics Based on Up-Taper and Single Mode–Multimode Fiber Structure

Discharge Splicing-Free Ultra-Highly Sensitive Fiber-Optic Temperature Sensor Based on PDMS and the Vernier Effect

Highly-sensitive temperature sensor based on photopolymerized-waveguide embedded Mach-Zehnder interferometer

High sensitivity temperature and gas pressure sensor based on PDMS sealed tapered hollow-core fiber

Experiment and Analysis of Temperature Sensing of Microstructured Fiber with Silver and PDMS Films

High-sensitivity temperature sensor based on PDMS-coated photonic crystal fiber interferometer

High Performance Temperature Sensing of Single Mode-Multimode-Single Mode Fiber With Thermo-Optic Polymer as Cladding of Multimode Fiber Segment

PDMS-coated No-Core Fiber Interferometer with Enhanced Sensitivity for Temperature Monitoring Applications

High sensitivity optical fiber temperature sensor based on PDMS-filled with extended measuring range

High Sensitivity Temperature Sensor Based on a PDMS-assisted Bow-Shaped Fiber Structure